Mesh rack
sneakylizard123-4·mesh_rack·kicad/mesh_rack.kicad_pcb
About the Mesh rack PCB
Mesh rack is an open source ESP32 PCB design by sneakylizard123-4, published on GitHub. It is a 4-layer board measuring 200 × 100 mm, with 74 components from 43 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the NEO-M8N, XL1509-5.0, XL1509-3.3, TPD2EUSB30 and E22-900M30S. By type, the board carries 23 capacitors, 18 resistors, 12 connectors, 10 diodes, 7 ICs and 2 transistors.
It belongs with the rf & radio and iot & wireless designs in this gallery.

Main components on the Mesh rack
Mesh rack bill of materials (BOM)
74 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NEO-M8N | ublox_NEO | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | XL1509-5.0 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | XL1509-3.3 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TPD2EUSB30 | Texas_DRT-3 | U5 |
| 1 | E22-900M30S | XCVR_E22-900M30S | U6 |
| 1 | INA260 | TSSOP-16_4.4x5mm_P0.65mm | U7 |
| 1 | IRF9540N | TO-220-3_Vertical | Q1 |
| 1 | IRF540N | TO-220-3_Vertical | Q2 |
| 1 | Input | BarrelJack_Horizontal | J1 |
| 1 | Power Switch | Altech_AK100_1x02_P5.00mm | J2 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 2 | CONN_01X02 Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J4, J10 |
| 1 | BOOT | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | EN | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_Coaxial_Small | U.FL_Molex_MCRF_73412-0110_Vertical | J7 |
| 1 | CONN_02X09_COUNTER_CLOCKWISE Conn_02x09_Counter_Clockwise | PinHeader_2x09_P2.54mm_Vertical | J8 |
| 1 | CONN_01X10 Conn_01x10 | PinSocket_1x10_P2.54mm_Vertical | J9 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Conn_Coaxial_Small | SMA_Amphenol_901-143_Horizontal | J12 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BZV55B15 | D_MiniMELF | D1 |
| 2 | 1N5820 | D_DO-201AD_P15.24mm_Horizontal | D2, D10 |
| 1 | SM6T30A | D_SMB | D3 |
| 6 | LED | LED_D5.0mm | D4, D5, D6, D7, D8, D9 |
| 1 | 33UH 33uH | L_1206_3216Metric | L1 |
| 1 | 47UH 47uH | L_1206_3216Metric | L2 |
| 3 | 10UF 10uF | CP_Radial_D5.0mm_P2.50mm | C1, C12, C23 |
| 3 | 0.1UF 0.1uF | C_0805_2012Metric | C2, C4, C24 |
| 1 | 1UF 1uF | CP_Radial_D5.0mm_P2.50mm | C3 |
| 3 | 22UF 22uF | CP_Radial_D10.0mm_P5.00mm | C5, C6, C18 |
| 1 | 100UF 100uF | CP_Radial_D10.0mm_P5.00mm | C7 |
| 2 | 47UF 47uF | CP_Radial_D10.0mm_P5.00mm | C8, C10 |
| 1 | 220UF 220uF | CP_Radial_D10.0mm_P5.00mm | C9 |
| 2 | 100NF 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C11, C22 |
| 2 | 0.1UF 0.1uF | CP_Radial_D10.0mm_P5.00mm | C13, C16 |
| 2 | 470UF 470uF | CP_Radial_D10.0mm_P5.00mm | C14, C17 |
| 1 | 10UF 10uF | CP_Radial_D10.0mm_P5.00mm | C15 |
| 2 | 680UF 680uF | CP_Radial_D10.0mm_P5.00mm | C19, C20 |
| 11 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7, R18 +3 |
| 2 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | 5.1K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
| 2 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R17 |
| 1 | 100K 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R21 |
Mesh rack design files
The KiCad project lives in the sneakylizard123-4/mesh_rack repository on GitHub; these links point at the commit this page was built from.
Mesh rack: common questions
What microcontroller does the Mesh rack use?
The Mesh rack is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Mesh rack PCB?
The Mesh rack measures 200 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mesh rack?
74 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mesh rack design files?
From the sneakylizard123-4/mesh_rack repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mesh rack design in my own project?
The repository has no license, so all rights stay with sneakylizard123-4. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mesh rack without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k