STM32H743

sneakylizard123-4·STM32H743·kicad/STM32H743.kicad_pcb

STM32H743 PCB layout, top view — open source STM32 board by sneakylizard123-4

About the STM32H743 PCB

STM32H743 is an open source STM32 PCB design by sneakylizard123-4, published on GitHub under the CERN-OHL-P-2.0 license. It is a 6-layer board measuring 100 × 75 mm, with 162 components from 57 distinct parts.

Its main chip is the STM32H743XIHX, from the STM32 family. Other key parts include the USBLC6-2SC6, TLV75733PDBV, TLV75725PDBV, TLV75718PDBV and TLV75712PDBV. By type, the board carries 83 capacitors, 35 resistors, 12 ICs, 11 diodes, 9 connectors and 4 crystals.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio. The UP5K provides small programmable logic for custom interfaces and filters, and also an easy way to goof off with the FPGA. The design is aimed at au

This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio. The UP5K provides small programmable logic for custom interfaces and filters, and also an easy way to goof off with the FPGA. The design is aimed at audio DSP and FPGA experiments that would otherwise need several dev boards.

The board has not been fabricated, assembled, or brought up yet. Bare-metal firmware is included and builds cleanly, but it has not been run on hardware. An enclosure and a full mechanical assembly are not included in this revision.

STM32H743, from the project README
From the project README

Main components on the STM32H743

STM32H743 bill of materials (BOM)

162 components, 57 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
USBLC6-2SC6
U1, U2
1
STM32H743XIHX
STM32H743XIHx
U3
1
TLV75733PDBV
U4
1
TLV75725PDBV
U5
1
TLV75718PDBV
U6
1
TLV75712PDBV
U7
1
LAN8742A
U8
1
CS4344
U9
1
TPD3S014
U10
1
USB3300-EZK
U11
1
ICE40UP5K-SG48ITR
U12
1
25MHZ
25MHz
X1
1
32.768KHZ
32.768KHz
X2
1
8122S-25.000NQ33FTL
TCXO
HCI
X3
1
SI5351C-B-GM
Si5351C-B-GM
Y1
1
USB_A
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2
1
RJ45_HALO_HFJ11-X2450E-LXXRL
RJ45_Halo_HFJ11-x2450E-LxxRL
J3
1
MICRO_SD_CARD_DET2
Micro_SD_Card_Det2
J4
1
AUDIOJACK3
AudioJack3
J5
Show 37 more
QtyPartRefs
1
CONN_02X05_COUNTER_CLOCKWISE
Conn_02x05_Counter_Clockwise
J6
1
CONN_02X22_ODD_EVEN
Conn_02x22_Odd_Even
J7
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J8
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J9
1
MMICT390200012
TDK InvenSense(应美盛)
MIC1
1
ICS-43434
MK1
2
SW_Push
SW1, SW2
2
SMF12A
D1, D2
4
GREEN
D3, D4, D5, D6
2
YELLOW
D7, D9
2
RED
D8, D10
1
C5620247
LED_ABGR
D11
4
1k @ 100MHz
FB1, FB2, FB3, FB4
1
120UF
120uF
C1
38
0.1UF
0.1uF
C2, C3, C4, C37, C39, C42, C45, C46 +30
3
2.2UF
2.2uF
C5, C6, C7
2
12PF
12pF
C8, C10
2
18PF
18pF
C9, C11
9
100NF
100nF
C12, C13, C14, C15, C20, C21, C22, C23 +1
11
10UF
10uF
C16, C17, C18, C19, C24, C25, C26, C27 +3
10
1UF
1uF
C28, C29, C30, C31, C32, C33, C34, C40 +2
1
470PF
470pF
C35
1
22nF 50v
C36
2
3.3UF
3.3uF
C43, C44
3
4.7UF
4.7uF
C51, C52, C53
2
22
R1, R2
2
5.1K
5.1k
R3, R4
11
10K
10k
R5, R6, R7, R8, R12, R13, R14, R19 +3
1
12.1k 1%
R9
2
330
R10, R11
2
470
R15, R16
1
12k 1%
R17
1
820
R18
2
1.8K
1.8k
R20, R21
8
0
R25, R26, R27, R28, R29, R30, R31, R32
2
1k
RN1, RN2
1
0
RN3

STM32H743 design files

The KiCad project lives in the sneakylizard123-4/STM32H743 repository on GitHub; these links point at the commit this page was built from.

STM32H743: common questions

What microcontroller does the STM32H743 use?

The STM32H743 is built around the STM32H743XIHX, from the STM32 family.

How big is the STM32H743 PCB?

The STM32H743 measures 100 × 75 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the STM32H743?

162 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32H743 design files?

From the sneakylizard123-4/STM32H743 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32H743 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which sneakylizard123-4 chose for the repository.

Can I test firmware for the STM32H743 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards