5 open source boards using the TLV75718PDBV

Real designs built with the TLV75718PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TLV75718PDBV

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV75718PDBV connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 5V on 5 of 5 designs.
  • The EN pin is tied to 5V on 5 of 5 designs.
  • The OUT pin is tied to 1.8V on 5 of 5 designs.
INpin 1Connected to: 5V 100%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 5V 100%
NCpin 4Connected to: Not connected 100%
OUTpin 5Connected to: 1.8V 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Faultycat by ElectronicCats, Tv070wxm hat by ScandentLLC, Nref wifi by cetola and CP2112 by sneakylizard123-4.

The TLV75718PDBV in open source designs

The gallery holds 5 open source boards using the TLV75718PDBV from 5 GitHub repositories; a typical one measures about 56.5 × 65 mm and carries around 44 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is Faultycat by ElectronicCats.

Parts used alongside the TLV75718PDBV

Microcontrollers on boards using the TLV75718PDBV

TLV75718PDBV: common questions

Where can I find a TLV75718PDBV reference design?

Each of the 5 boards on this page is a real design using the TLV75718PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75718PDBV IN pin connected?

The IN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75718PDBV.

How is the TLV75718PDBV EN pin connected?

The EN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75718PDBV.

How is the TLV75718PDBV OUT pin connected?

The OUT pin is tied to 1.8V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV75718PDBV.

Which microcontrollers do boards using the TLV75718PDBV use?

Most are built on Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TLV75718PDBV?

The median is 56.5 × 65 mm, and 40% are two-layer designs.

What is the most popular open source board using the TLV75718PDBV?

By GitHub stars, Faultycat by ElectronicCats, with 183 stars.

Can I simulate one of these boards using the TLV75718PDBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part