36 open source boards using the LAN8742A
Real designs built with the LAN8742A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Analog i
deimoscontrols
223 × 95 mm568 parts4LNo license43STM32
BigBoy
transistorfet
160 × 100 mm120 parts4LMIT17STM32
Asynth2Osc
everedero
83 × 106 mm204 parts4LGPL-3.04STM32
LEDNip
MayaPosch
90 × 100 mm148 parts4LBSD-3-Clause3STM32
OpenWeatherStation
VitalSeptfonds
50 × 100 mm107 parts2LMIT2STM32
Fpga mocap
TobiasJaeggi
60.6 × 100 mm188 parts6LGPL-3.01STM32
ETH1CLCR2
BehrensG
160 × 100 mm591 parts6LNo license0STM32
ETH1LCR3
BehrensG
160 × 100 mm532 parts6LNo license0STM32
AEM-60DC8 V1.2
akhemka-cmd
122 × 87.6 mm350 parts2LNo license0RP2040/RP2350
HVDC test board
MECSEM
120 × 120 mm287 parts4LGPL-3.00STM32
Factory in a box
klaus-liebler
188 × 65 mm264 parts4LNo license0STM32
ADC7177B1
BehrensG
160 × 100 mm233 parts4LNo license0STM32
VNA Project
fdreshaj
200 × 200 mm220 parts6LNo license0STM32
Asynth2osc
madees
69 × 106 mm194 parts4LGPL-3.00Stigma mission board hysteresis
tudsat-rocket
60 × 130 mm170 parts4LNo license0STM32
STM32H743
sneakylizard123-4
100 × 75 mm162 parts6LCERN-OHL-P-2.00STM32
Valve driver
npgo22
95 × 60 mm142 parts4LNo license0STM32
PT
npgo22
75 × 60 mm139 parts4LNo license0STM32
ETH1ISO224
BehrensG
100 × 45 mm137 parts4LNo license0STM32
APRL-ThermoComm-HW
npgo22
97 × 97 mm117 parts4LNo license0STM32
LC
npgo22
71.6 × 60 mm112 parts4LNo license0STM32
Strawberry-Pi
GoTouchGra55
85 × 57 mm83 parts4LNo license0Analog frontend panel
deimoscontrols
164.4 × 89.5 mm377 parts4LNo license43STM32
BigBoy.stretch bkup
transistorfet
160 × 100 mm118 parts4LMIT17Raspberry Pi
FCSat dual
SunnyYoshimitsu
93 × 93 mm215 parts4LNo license3STM32
Pressure
npgo22
75 × 60 mm139 parts4LNo license0- schematic only · 197 partsSTM32
DegraderDosimeter
ButiTando
197 parts4LNo license0 STM32
Stm32h7 base
deimoscontrols
80.7 × 74.5 mm191 parts4LNo license43STM32
Stm
Purdue-Space-Program
71.4 × 46.2 mm69 parts2LNo license2RP2040/RP2350
Dev board
iamdarshg
100 × 50 mm172 parts4LNo license1ESP32
PROJ500 - Real-Time Control Unit
AislingBee
79.6 × 61.4 mm137 parts2LNo license0STM32
Thermocouple Board
npgo22
97 × 97 mm117 parts4LNo license0STM32
LC DAQ
npgo22
71.6 × 60 mm112 parts4LNo license0STM32
Thermocouple Board
npgo22
97 × 97.1 mm117 parts4LNo license0STM32
PT
npgo22
67 × 68 mm105 parts4LNo license0STM32
TC DAQ
npgo22
86 × 60 mm99 parts4LNo license0
How designs wire the LAN8742A
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the LAN8742A connects to, and the resistors, capacitors and other passives placed on it.
- The VDDCR pin has a capacitor to GND on 24 of 25 designs, most often 1 µF (then 470 pF).
- The VDD2A pin has a decoupling capacitor on 23 of 26 designs, most often 100 nF (then 10 µF).
- The VDD1A pin has a decoupling capacitor on 23 of 25 designs, most often 100 nF (then 10 µF).
- The VDDIO pin has a decoupling capacitor on 22 of 25 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD2Apin 1 | Connected to: 3.3V 62% · a signal 38% |
|
| LED2/INTSELpin 2 | Connected to: A connector 62% |
|
| XTAL2pin 4 | Connected to: Signal 73% · not connected 23% |
|
| XTAL1/CLKINpin 5 | Connected to: Signal 92% |
|
| VDDCRpin 6 | Connected to: Signal 84% · VDDCR 16% |
|
| RXD1/MODE1pin 7 | Connected to: The microcontroller 36% |
|
| RXD0/MODE0pin 8 | Connected to: The microcontroller 36% |
|
| VDDIOpin 9 | Connected to: 3.3V 100% |
|
| RXER/PHYAD0pin 10 | Connected to: Signal 76% · not connected 24% |
|
| CRS_DV/MODE2pin 11 | Connected to: The microcontroller 40% |
|
| MDIOpin 12 | Connected to: The microcontroller 92% |
|
| INT/REFCLKOpin 14 | Connected to: The microcontroller 32% |
|
| VDD1Apin 19 | Connected to: 3.3V 64% · a signal 36% |
|
| TXNpin 20 | Connected to: A connector 72% |
|
| TXPpin 21 | Connected to: A connector 72% |
|
| RXNpin 22 | Connected to: A connector 72% |
|
| RXPpin 23 | Connected to: A connector 72% |
|
| RBIASpin 24 | Connected to: Signal 92% |
|
| VSSpin 25 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog frontend panel by deimoscontrols, BigBoy by transistorfet, Asynth2Osc by everedero and FCSat dual by SunnyYoshimitsu.
The LAN8742A in open source designs
The gallery holds 36 open source boards using the LAN8742A from 28 GitHub repositories; a typical one measures about 95 × 93 mm and carries around 155 components.
89% use four copper layers or more, and 25% carry an open source license.
The most starred is Analog i by deimoscontrols.
Parts used alongside the LAN8742A
Microcontrollers on boards using the LAN8742A
What boards using the LAN8742A are built for
LAN8742A: common questions
Where can I find a LAN8742A reference design?
Each of the 36 boards on this page is a real design using the LAN8742A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LAN8742A VDDCR pin connected?
The VDDCR pin has a capacitor to GND on 24 of 25 designs, most often 1 µF (then 470 pF). Counted from the KiCad layouts of 26 open source designs using the LAN8742A.
What decoupling capacitors do designs use on the LAN8742A VDD2A pin?
The VDD2A pin has a decoupling capacitor on 23 of 26 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 26 open source designs using the LAN8742A.
What decoupling capacitors do designs use on the LAN8742A VDD1A pin?
The VDD1A pin has a decoupling capacitor on 23 of 25 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 26 open source designs using the LAN8742A.
What parts are used alongside the LAN8742A?
The USBLC6-2SC6, AP2112K-3.3, STM32H743VITx, USBLC6-4SC6 and TJA1042T-3 appear in the most repositories here.
Which microcontrollers do boards using the LAN8742A use?
Most are built on STM32 (30), RP2040/RP2350 (2), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the LAN8742A?
The median is 95 × 93 mm, and 11% are two-layer designs.
What is the most popular open source board using the LAN8742A?
By GitHub stars, Analog i by deimoscontrols, with 43 stars.
Can I simulate one of these boards using the LAN8742A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.