Dasduino CONNECT

SolderedElectronics·Dasduino-CONNECT-hardware-design·CAD/V1.1.1/Dasduino_CONNECT.kicad_pcb

Dasduino CONNECT PCB layout, top view — open source ESP8266 board by SolderedElectronics

About the Dasduino CONNECT PCB

Dasduino CONNECT is an open source ESP8266 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 63 × 25.9 mm, with 53 components from 31 distinct parts.

Its main chip is the ESP8266(ESP12-F), from the ESP8266 family. Other key parts include the CH340C, TPS7A2633DRVR and TP4056M. By type, the board carries 20 resistors, 9 capacitors, 6 diodes, 5 relays, 4 ICs and 3 transistors.

It belongs with the iot & wireless, power & battery and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Dasduino-CONNECT designed by Soldered Electronics.

The biggest advantage of Dasduino Connect hides within its name. If you ever wanted to connect your development board directly to the Internet, look no further! This Dasduino comes with the ability to connect to Wi-Fi. It even comes with the TCP/IP protocol suite that supports DNS. Connecting the physical world with the Internet has never been easier! Dasduino Connect is based on the well-known ESP8266 microchip which can be a bit complicated to use on its own. Adding the fact that it works from the Arduino IDE, working this board is as simple as it gets.

Dasduino CONNECT, from the project README
From the project README

Main components on the Dasduino CONNECT

Dasduino CONNECT bill of materials (BOM)

53 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340C
U1
1
TPS7A2633DRVR
U2
1
TP4056M
U3
1
ESP8266(ESP12-F)
U4
1
PMOS-SOT-23-3
Q1
2
NPN-SOT-23-3
Q2, Q3
1
1206FUSE-500MA
1206FUSE-500mA
F1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP1
1
easyC-SMD
K1
1
U262-161N-4BVC11
K2
1
JST-2PIN-SMD
JST-2pin-SMD
K3
2
HEADER_MALE_15X1
K4, K5
2
YTSA007A0151803B
SW1, SW2
1
white
D1
1
blue
D2
1
purple
D3
1
WS2812B-2020
D4
1
red
D5
1
BAT20J
D7
Show 11 more
QtyPartRefs
2
0.1UF
0.1uF
C1, C2
4
2.2UF
2.2uF
C3, C5, C7, C8
2
100NF
100nF
C4, C9
1
270PF
270pF
C6
3
1k
R1, R2, R5
4
2K2
2k2
R3, R4, R6, R12
2
5.1K
5.1k
R7, R8
8
10K
10k
R9, R10, R16, R17, R18, R19, R20, R21
1
3k
R11
1
100K
100k
R14
1
2K49
2k49
R15

Dasduino CONNECT design files

The KiCad project lives in the SolderedElectronics/Dasduino-CONNECT-hardware-design repository on GitHub; these links point at the commit this page was built from.

Dasduino CONNECT: common questions

What microcontroller does the Dasduino CONNECT use?

The Dasduino CONNECT is built around the ESP8266(ESP12-F), from the ESP8266 family.

How big is the Dasduino CONNECT PCB?

The Dasduino CONNECT measures 63 × 25.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dasduino CONNECT?

53 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dasduino CONNECT design files?

From the SolderedElectronics/Dasduino-CONNECT-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dasduino CONNECT design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Dasduino CONNECT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in Dasduino-CONNECT-hardware-design

Similar boards