Sduino Nova2
SolderedElectronics·Dasduino-CONNECT-hardware-design·CAD/V1.0.0/Sduino Nova2.kicad_pcb
About the Sduino Nova2 PCB
Sduino Nova2 is an open source ESP8266 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 25.9 × 63 mm, with 52 components from 32 distinct parts.
Its main chip is the ESP8266(ESP12-F), from the ESP8266 family. Other key parts include the CH340C, TPS7A2633DRVR and TP4056M. By type, the board carries 20 resistors, 9 capacitors, 6 diodes, 5 relays, 4 ICs and 3 transistors.
It belongs with the iot & wireless, power & battery and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Dasduino-CONNECT designed by Soldered Electronics.
The biggest advantage of Dasduino Connect hides within its name. If you ever wanted to connect your development board directly to the Internet, look no further! This Dasduino comes with the ability to connect to Wi-Fi. It even comes with the TCP/IP protocol suite that supports DNS. Connecting the physical world with the Internet has never been easier! Dasduino Connect is based on the well-known ESP8266 microchip which can be a bit complicated to use on its own. Adding the fact that it works from the Arduino IDE, working this board is as simple as it gets.

Main components on the Sduino Nova2
Sduino Nova2 bill of materials (BOM)
52 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOP-16 | U1 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U2 |
| 1 | TP4056M | TP4056M-MSOP8 | U3 |
| 1 | ESP8266(ESP12-F) | ESP 8266(ESP12-F) | U4 |
| 1 | PMOS-SOT-23-3 | SOT-23-3 | Q1 |
| 2 | NPN-SOT-23-3 | SOT-23-3 | Q2, Q3 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | easyC-SMD | easyC-connector | K1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K3 |
| 2 | HEADER_MALE_15X1 | HEADER_MALE_15X1 | K4, K5 |
| 2 | YTSA007A0151803B | YTSA007A0151803B | SW1, SW2 |
| 1 | blue | 0402LED | D1 |
| 1 | orange | 0402LED | D2 |
| 1 | purple | 0402LED | D3 |
| 1 | WS2812B-2020 | WS2812B-2020 | D4 |
| 1 | red | 0402LED | D5 |
| 1 | BAT20J | SOD-323 | D7 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2.2UF 2.2uF | 0603C | C3, C5, C7, C8 |
| 1 | 100NF 1uF | 0603C | C4 |
| 1 | 270PF 270pF | 0603C | C6 |
| 1 | 100NF 100nF | 0603C | C9 |
| 3 | 1k | 0603R | R1, R2, R5 |
| 4 | 2K2 0R | 0402R | R3, R4, R6, R12 |
| 2 | 5.1K 5.1k | 0603R | R7, R8 |
| 2 | 10K 10k | 0603R | R9, R10 |
| 1 | 3k | 0603R | R11 |
| 1 | 100K 100k | 0603R | R14 |
| 1 | 2K49 2.5k | 0603R | R15 |
| 6 | 10K 0603R | 0603R | R16, R17, R18, R19, R20, R21 |
Sduino Nova2 design files
The KiCad project lives in the SolderedElectronics/Dasduino-CONNECT-hardware-design repository on GitHub; these links point at the commit this page was built from.
Sduino Nova2: common questions
What microcontroller does the Sduino Nova2 use?
The Sduino Nova2 is built around the ESP8266(ESP12-F), from the ESP8266 family.
How big is the Sduino Nova2 PCB?
The Sduino Nova2 measures 25.9 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sduino Nova2?
52 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sduino Nova2 design files?
From the SolderedElectronics/Dasduino-CONNECT-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sduino Nova2 design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Sduino Nova2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Dasduino-CONNECT-hardware-design
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398