8 open source boards using the TPESD0504C6
Real designs built with the TPESD0504C6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPNuclone LPC845M301BD48 small
Squantor
50 × 50 mm67 parts2LMIT1
Nuclone devboard medium 2 layer USB-C UART
50 × 76.2 mm45 parts2LMIT24
Nuclone devboard small 4 layer
50 × 50 mm37 parts4LMIT24
RP2040/RP2350Nuclone RP2040 SOIC
50 × 50 mm56 parts4LMIT1
Nuclone devboard small 2 layer USB-C data
50 × 50 mm36 parts2LMIT24
RP2040/RP2350Nuclone RP2040 SON
50 × 50 mm56 parts4LMIT1
Nuclone devboard medium 2 layer USB-C data
50 × 76.2 mm35 parts2LMIT24
RP2040/RP2350Nuclone RP2040 WSON
50 × 50 mm56 parts4LMIT1
The TPESD0504C6 in open source designs
The gallery holds 8 open source boards using the TPESD0504C6 from 2 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 51 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Nuclone devboard medium 2 layer USB-C UART by Squantor.
Parts used alongside the TPESD0504C6
Microcontrollers on boards using the TPESD0504C6
What boards using the TPESD0504C6 are built for
TPESD0504C6: common questions
Where can I find a TPESD0504C6 reference design?
Each of the 8 boards on this page is a real design using the TPESD0504C6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPESD0504C6 use?
Most are built on RP2040/RP2350 (3) and NXP (1).
How big is a typical board using the TPESD0504C6?
The median is 50 × 50 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPESD0504C6?
By GitHub stars, Nuclone devboard medium 2 layer USB-C UART by Squantor, with 24 stars.
Can I simulate one of these boards using the TPESD0504C6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.