Sam17-vco

sssamuelll·analog-modular-synthesizer·hardware/03-vco/kicad/sam17-vco.kicad_pcb

Sam17-vco PCB layout, top view — open source board by sssamuelll

About the Sam17-vco PCB

Sam17-vco is an open source PCB design by sssamuelll, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 114 × 124 mm, with 129 components from 17 distinct parts.

Other key parts include the SSI2130, AD5686RBRUZ, ADR4525BRZ, TL074H and 74HC14. By type, the board carries 23 capacitors, 14 ICs and 2 connectors.

It belongs with the audio designs in this gallery.

From the project

SAM17, an open-source polyphonic analog synthesizer: 16 analog channels, a 16-line FM matrix, an 8x8 patch bay through an analog crosspoint, and an STM32N657 brain running Rust. CERN-OHL-S / GPL-3.0 / CC BY-SA. Began as a 2020 engineering thesis in Venezuela.

Cuatro voces idénticas en una sola placa, con un solo juego de mandos — que no viven aquí: son sensores del panel, y lo que llega a esta placa son números por el enlace serie. Sustituye a los tres osciladores independientes de la tesis (Gráficos 25-26).

El núcleo es el SSI2130 (Sound Semiconductor, 2020), no el CEM3340 de la tesis. Lo que ese cambio se lleva por delante: la resistencia de compensación térmica (la lleva el chip), el amplificador de ×2.8 del CV de tono (la entrada del expo es un nodo de corriente), el mezclador externo y el problema de amplitudes desiguales (el chip trae un…

Main components on the Sam17-vco

Sam17-vco bill of materials (BOM)

129 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
SSI2130
QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm
U1, U2, U3, U4
3
AD5686RBRUZ
TSSOP-16_4.4x5mm_P0.65mm
U5, U6, U7
1
ADR4525BRZ
SOIC-8_3.9x4.9mm_P1.27mm
U8
1
TL074H
SOIC-14_3.9x8.7mm_P1.27mm
U9
1
74HC14
SOIC-14_3.9x8.7mm_P1.27mm
U10
1
L78L05
SOT-89-3
U11
1
LD1117S33
SOT-223-3_TabPin2
U12
1
TMP1075
VSSOP-8_3x3mm_P0.65mm
U13
1
24AA02E48
SOT-23-5
U14
1
Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical
J1
1
IDC-Header_2x06_P2.54mm_Vertical
J2
20
C_0805_2012Metric
C_AC1A, C_AC1B, C_AC2A, C_AC2B, C_AC3A, C_AC3B, C_AC4A, C_AC4B +12
8
Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles
J_CV1, J_CV2, J_CV3, J_CV4, J_OUT1, J_OUT2, J_OUT3, J_OUT4
62
R_0805_2012Metric
R_BW1, R_BW2, R_BW3, R_BW4, R_CVIN1, R_CVIN2, R_CVIN3, R_CVIN4 +54
4
10UF
C_0805_2012Metric
C8, C9, C25, C26
18
C_0805_2012Metric
C10, C12, C13, C14, C15, C16, C17, C18 +10
1
1UF
C_0805_2012Metric
C11

Sam17-vco design files

The KiCad project lives in the sssamuelll/analog-modular-synthesizer repository on GitHub; these links point at the commit this page was built from.

Sam17-vco: common questions

How big is the Sam17-vco PCB?

The Sam17-vco measures 114 × 124 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Sam17-vco?

129 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sam17-vco design files?

From the sssamuelll/analog-modular-synthesizer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sam17-vco design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which sssamuelll chose for the repository.

More boards in analog-modular-synthesizer

Similar boards