11 open source boards using the TMP1075

Real designs built with the TMP1075, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TMP1075

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TMP1075 connects to, and the resistors, capacitors and other passives placed on it.

  • The V+ pins have a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 220 nF).
  • The ALERT pin is left unconnected on 8 of 9 designs.
  • The A0 pins is tied to GND on 75% of them (a signal on 2).
  • The SCL pin has a pull-up to 3.3V on 5 of 9 designs, most often 2.7 kΩ (then 4.7 kΩ).
SCLpin 1Connected to: TMP1075 67%, EMC2302-1 56%, T-DISPLAY-S3 44%
  • Pull-up to 3.3V on 56% · 2.7 kΩ (2), 4.7 kΩ (2), 1.5 kΩ (1)
GNDpin 2Connected to: GND 67% · a signal 33%
ALERTpin 3Connected to: Not connected 89%
A0pin 4, 7Connected to: GND 75% · a signal 17%
V+pin 5, 8Connected to: 3.3V 75% · GND 25%
  • Decoupling capacitor on 100% · 100 nF (6), 220 nF (1)
SDApin 6Connected to: TMP1075 67%, EMC2302-1 56%, T-DISPLAY-S3 44% · GND 22%
  • Pull-up to 3.3V on 44% · 2.7 kΩ (2), 1.5 kΩ (1), 4.7 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Qaxe by shufps, NerdOCTAXE-Gamma by Patsch91, Emberone00-pcb by 256foundation and NerdOCTAXE-Plus by Patsch91.

The TMP1075 in open source designs

The gallery holds 11 open source boards using the TMP1075 from 9 GitHub repositories; a typical one measures about 114 × 137 mm and carries around 192 components.

100% use four copper layers or more, and 82% carry an open source license.

The most starred is Qaxe by shufps.

Microcontrollers on boards using the TMP1075

What boards using the TMP1075 are built for

TMP1075: common questions

Where can I find a TMP1075 reference design?

Each of the 11 boards on this page is a real design using the TMP1075. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TMP1075 V+ pin?

The V+ pins have a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 9 open source designs using the TMP1075.

How is the TMP1075 ALERT pin connected?

The ALERT pin is left unconnected on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the TMP1075.

How is the TMP1075 A0 pin connected?

The A0 pins is tied to GND on 75% of them (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the TMP1075.

What parts are used alongside the TMP1075?

The 25MHZ, MCP1824T-0802E, AP3211, CSD95472Q5MC and EMC2302-1 appear in the most repositories here.

Which microcontrollers do boards using the TMP1075 use?

Most are built on STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the TMP1075?

The median is 114 × 137 mm, and 0% are two-layer designs.

What is the most popular open source board using the TMP1075?

By GitHub stars, Qaxe by shufps, with 244 stars.

Can I simulate one of these boards using the TMP1075 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part