Head sensor
About the Head sensor PCB
Head sensor is an open source PCB design by stef1029, published on GitHub. It is a 4-layer board measuring 9.9 × 7.6 mm, with 16 components from 13 distinct parts.
Other key parts include the LTC4332IUFD-PBF, LSM6DSV32XTR and MMC5983MA. By type, the board carries 6 capacitors, 5 resistors, 3 ICs, 1 transistor and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Head-fixed floating platform for studying sensory-guided spatial orienting in mice — hardware, firmware and control software.
KiCad projects, schematics, PCB layouts, BOMs, and fabrication outputs.
Main components on the Head sensor
Head sensor bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC4332IUFD-PBF | UFD_05-08-1711_ADI | U1 |
| 1 | LSM6DSV32XTR | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | MMC5983MA | LGA-16_3x3mm_P0.5mm | U3 |
| 1 | DMN2300UFB4-7B | Diodes_DFN1006-3 | Q1 |
| 1 | A79608-001 | OMNETICS_A79607-001 | J1 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C2, C4 |
| 2 | 100NF 100nF | C_0402_1005Metric | C3, C5 |
| 1 | 10UF 10uF | C_0603_1608Metric | C6 |
| 2 | 620 | R_0402_1005Metric | R1, R2 |
| 1 | 110 | R_0402_1005Metric | R3 |
| 1 | 10K 10k | R_0402_1005Metric | R4 |
| 1 | 100K 100k | R_0402_1005Metric | R5 |
Head sensor design files
The KiCad project lives in the stef1029/trilab-floating-platform repository on GitHub; these links point at the commit this page was built from.
Head sensor: common questions
How big is the Head sensor PCB?
The Head sensor measures 9.9 × 7.6 mm, has 4 copper layers and is 0.6 mm thick.
How many components are on the Head sensor?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Head sensor design files?
From the stef1029/trilab-floating-platform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Head sensor design in my own project?
The repository has no license, so all rights stay with stef1029. Use it as a reference, and ask the author before reusing the design.
More boards in trilab-floating-platform
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956