17 open source boards using the LSM6DSV32XTR

Real designs built with the LSM6DSV32XTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the LSM6DSV32XTR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LSM6DSV32XTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_IO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
  • The VDD_8 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
  • The SDX/AH1/QVAR1 pin is tied to GND on 9 of 9 designs.
  • The SCX/AH2/QVAR2 pin is tied to GND on 9 of 9 designs.
SDO/SA0pin 1Connected to: A connector 33%, the microcontroller 33% · GND 44%
  • Pull-up to 3.3V on 33% · 10 kΩ (3)
SDX/AH1/QVAR1pin 2Connected to: GND 100%
SCX/AH2/QVAR2pin 3Connected to: GND 100%
VDD_IOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (20), 1 µF (2)
GND_6pin 6Connected to: GND 100%
GND_7pin 7Connected to: GND 100%
VDD_8pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (19), 1 µF (2), 22 µF (1)
INT2_9pin 9Connected to: Not connected 67% · a signal 33%
OCS_AUXpin 10Connected to: Not connected 78% · 3.3V 22%
SDO_AUXpin 11Connected to: Not connected 89%
CS_12pin 12Connected to: The microcontroller 33% · 3.3V 44%
  • Capacitor to GND on 44% · 100 nF (8), 22 µF (1), 1 µF (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (2), 100 kΩ (1)
SCL_13pin 13Connected to: The microcontroller 67%, a connector 33%
  • Pull-up to 3.3V on 44% · 1 kΩ (1), 2.7 kΩ (1), 4.7 kΩ (1)
SDA_14pin 14Connected to: The microcontroller 67%, a connector 33%
  • Pull-up to 3.3V on 44% · 1 kΩ (1), 2.7 kΩ (1), 4.7 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CanardBoard by waterloo-rocketry, DAQ-V4.1 by IlyaasAitSimmou, Floating hub by stef1029 and Hyperion controller by adamhrnciar.

The LSM6DSV32XTR in open source designs

The gallery holds 17 open source boards using the LSM6DSV32XTR from 9 GitHub repositories; a typical one measures about 30 × 51.6 mm and carries around 59 components.

88% use four copper layers or more, and 24% carry an open source license.

The most starred is CanardBoard by waterloo-rocketry.

Microcontrollers on boards using the LSM6DSV32XTR

LSM6DSV32XTR: common questions

Where can I find a LSM6DSV32XTR reference design?

Each of the 17 boards on this page is a real design using the LSM6DSV32XTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSV32XTR VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the LSM6DSV32XTR.

What decoupling capacitors do designs use on the LSM6DSV32XTR VDD_8 pin?

The VDD_8 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the LSM6DSV32XTR.

How is the LSM6DSV32XTR SDX/AH1/QVAR1 pin connected?

The SDX/AH1/QVAR1 pin is tied to GND on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the LSM6DSV32XTR.

What parts are used alongside the LSM6DSV32XTR?

The USBLC6-2SC6, AP63203WU-7, ASM330LHHTR, CP2102N-A02-GQFN28 and ESP32-WROOM-32E-N4 appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSV32XTR use?

Most are built on Nordic nRF (9), ESP32 (2), Raspberry Pi (2) and STM32 (2).

How big is a typical board using the LSM6DSV32XTR?

The median is 30 × 51.6 mm, and 12% are two-layer designs.

What is the most popular open source board using the LSM6DSV32XTR?

By GitHub stars, CanardBoard by waterloo-rocketry, with 15 stars.

Can I simulate one of these boards using the LSM6DSV32XTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part