LEDController

stefanhepp·eOrgan·boards/LEDController/LEDController.kicad_pcb

LEDController PCB layout, top view — open source AVR/Arduino board by stefanhepp

About the LEDController PCB

LEDController is an open source AVR/Arduino PCB design by stefanhepp, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 65 × 83 mm, with 12 components from 11 distinct parts.

Its main chip is the ATmega48-20P, from the AVR/Arduino family. Other key parts include the ULN2803A. By type, the board carries 7 connectors, 3 ICs and 2 capacitors.

It belongs with the audio and displays & leds designs in this gallery.

From the project

Electronic organ console project.

This project contains various parts of a midi-organ. The project consists of four main parts:

- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano). - The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard. - The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC. -…

Main components on the LEDController

LEDController bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
2
ULN2803A
U1, U4
1
ATmega48-20P
U2
1
ISP
J1
1
LED1
J2
1
LED2
J3
1
Buttons
J4
1
BoardCon
J5
1
BoardConOut
J6
1
LED3
J7
1
100nF
C1
1
10uF
C5

LEDController design files

The KiCad project lives in the stefanhepp/eOrgan repository on GitHub; these links point at the commit this page was built from.

LEDController: common questions

What microcontroller does the LEDController use?

The LEDController is built around the ATmega48-20P, from the AVR/Arduino family.

How big is the LEDController PCB?

The LEDController measures 65 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LEDController?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the LEDController design files?

From the stefanhepp/eOrgan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LEDController design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which stefanhepp chose for the repository.

Can I test firmware for the LEDController without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in eOrgan

Similar boards