KeyboardScanner
stefanhepp·eOrgan·boards/KeyboardScanner/KeyboardScanner.kicad_pcb
About the KeyboardScanner PCB
KeyboardScanner is an open source PCB design by stefanhepp, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 150 × 100 mm, with 32 components from 9 distinct parts.
Other key parts include the 74LS151, ULN2803A and 4069. By type, the board carries 10 ICs, 10 capacitors, 8 resistors and 4 connectors.
It belongs with the audio and displays & leds designs in this gallery.
From the project
Electronic organ console project.
This project contains various parts of a midi-organ. The project consists of four main parts:
- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano). - The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard. - The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC. -…
Main components on the KeyboardScanner
KeyboardScanner bill of materials (BOM)
32 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 74LS151 | DIP-16_W7.62mm | U1, U2, U3, U4, U6, U7, U9, U10 |
| 1 | ULN2803A | DIP-18_W7.62mm | U5 |
| 1 | 4069 | DIP-14_W7.62mm | U8 |
| 2 | Keyboard1 | IDC-Header_2x20_P2.54mm_Vertical | J1, J2 |
| 1 | Encoder | IDC-Header_2x10_P2.54mm_Horizontal | J3 |
| 1 | Select | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 9 | 100nF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 1 | 47uF | CP_Radial_D6.3mm_P2.50mm | C10 |
| 8 | 470 | R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
KeyboardScanner design files
The KiCad project lives in the stefanhepp/eOrgan repository on GitHub; these links point at the commit this page was built from.
KeyboardScanner: common questions
How big is the KeyboardScanner PCB?
The KeyboardScanner measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KeyboardScanner?
32 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the KeyboardScanner design files?
From the stefanhepp/eOrgan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KeyboardScanner design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which stefanhepp chose for the repository.
More boards in eOrgan
MIDIController-IO-Boards
stefanhepp
150 × 100 mm47 parts2LCC-BY-SA-4.00MIDIController-IO-MIDI
stefanhepp
150 × 100 mm45 parts2LCC-BY-SA-4.00NXP
MIDIController
stefanhepp
150 × 100 mm35 parts2LCC-BY-SA-4.00AVR/Arduino
PedalEncoder
stefanhepp
125 × 38.5 mm31 parts2LCC-BY-SA-4.00AVR/Arduino
PistonEncoder
stefanhepp
150 × 100 mm28 parts2LCC-BY-SA-4.00AVR/Arduino
TechnicsEncoder
stefanhepp
110 × 53 mm28 parts2LCC-BY-SA-4.00AVR/Arduino
KeyboardEncoder
stefanhepp
150 × 100 mm26 parts2LCC-BY-SA-4.00AVR/Arduino
ToeStudEncoder
stefanhepp
95 × 58 mm25 parts2LCC-BY-SA-4.00AVR/Arduino
Panel-MainControl
stefanhepp
142.1 × 72.1 mm22 parts2LCC-BY-SA-4.00Panel-MainControl-Keypad
stefanhepp
142 × 72 mm22 parts2LCC-BY-SA-4.00AVR/Arduino
LEDController
stefanhepp
65 × 83 mm12 parts2LCC-BY-SA-4.00
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k