ToeStudEncoder

stefanhepp·eOrgan·boards/ToeStudEncoder/ToeStudEncoder.kicad_pcb

ToeStudEncoder PCB layout, top view — open source AVR/Arduino board by stefanhepp

About the ToeStudEncoder PCB

ToeStudEncoder is an open source AVR/Arduino PCB design by stefanhepp, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 95 × 58 mm, with 25 components from 22 distinct parts.

Its main chip is the ATmega48-20P, from the AVR/Arduino family. Other key parts include the 6N137 and L7805. By type, the board carries 7 connectors, 6 capacitors, 6 resistors, 3 ICs, 1 transistor and 1 diode.

It belongs with the audio and displays & leds designs in this gallery.

From the project

Electronic organ console project.

This project contains various parts of a midi-organ. The project consists of four main parts:

- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano). - The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard. - The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC. -…

Main components on the ToeStudEncoder

ToeStudEncoder bill of materials (BOM)

25 components, 22 distinct parts.

QtyPartRefs
1
ATmega48-20P
U1
1
6N137
U2
1
L7805
U3
1
BC547
Q1
1
Swell
J1
1
ISP
J2
1
ToeLeft
J3
1
ToeRight
J4
1
MIDI In
J5
1
MIDI Out
J8
1
Controller
J9
1
Heatsink_Pad
HS1
1
1N4148
D1
2
100nF
C1, C2
1
330nF
C3
1
33uF
C4
1
10uF
C5
1
100nF
C6
1
10k
R1
1
4k7
R2
Show 2 more
QtyPartRefs
3
220
R3, R4, R6
1
220
R5

ToeStudEncoder design files

The KiCad project lives in the stefanhepp/eOrgan repository on GitHub; these links point at the commit this page was built from.

ToeStudEncoder: common questions

What microcontroller does the ToeStudEncoder use?

The ToeStudEncoder is built around the ATmega48-20P, from the AVR/Arduino family.

How big is the ToeStudEncoder PCB?

The ToeStudEncoder measures 95 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ToeStudEncoder?

25 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the ToeStudEncoder design files?

From the stefanhepp/eOrgan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ToeStudEncoder design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which stefanhepp chose for the repository.

Can I test firmware for the ToeStudEncoder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in eOrgan

Similar boards