Panel-MainControl
stefanhepp·eOrgan·boards/Panel-MainControl/Panel-MainControl.kicad_pcb
About the Panel-MainControl PCB
Panel-MainControl is an open source AVR/Arduino PCB design by stefanhepp, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 142.1 × 72.1 mm, with 22 components from 20 distinct parts.
Its main chip is the ATmega48-20P, from the AVR/Arduino family. Other key parts include the L7805, ULN2803A and 74LS151. By type, the board carries 11 connectors, 5 capacitors, 4 ICs and 1 resistor.
It belongs with the audio and displays & leds designs in this gallery.
From the project
Electronic organ console project.
This project contains various parts of a midi-organ. The project consists of four main parts:
- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano). - The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard. - The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC. -…
Main components on the Panel-MainControl
Panel-MainControl bill of materials (BOM)
22 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega48-20P | DIP-28_W7.62mm_Socket | U1 |
| 1 | L7805 | TO-220-3_Vertical | U2 |
| 1 | ULN2803A | DIP-18_W7.62mm | U3 |
| 1 | 74LS151 | DIP-16_W7.62mm | U4 |
| 1 | ISP | IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | PanelRight | IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Volume | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Btn1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Btn3 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | Btn5 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | Btn2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | Btn4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | Btn6 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 2 | Conn_01x10 | PinHeader_1x10_P2.00mm_Vertical | J10, J11 |
| 1 | Heatsink_Pad | Heatsink_Aavid_TO-220_H12.7mm | HS1 |
| 2 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C5 |
| 1 | 330nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 33uF | CP_Radial_D7.5mm_P2.50mm | C3 |
| 1 | 10uF | CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 10k | R_Array_SIP9 | RN1 |
Panel-MainControl design files
The KiCad project lives in the stefanhepp/eOrgan repository on GitHub; these links point at the commit this page was built from.
Panel-MainControl: common questions
What microcontroller does the Panel-MainControl use?
The Panel-MainControl is built around the ATmega48-20P, from the AVR/Arduino family.
How big is the Panel-MainControl PCB?
The Panel-MainControl measures 142.1 × 72.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel-MainControl?
22 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Panel-MainControl design files?
From the stefanhepp/eOrgan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Panel-MainControl design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which stefanhepp chose for the repository.
Can I test firmware for the Panel-MainControl without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in eOrgan
MIDIController-IO-Boards
stefanhepp
150 × 100 mm47 parts2LCC-BY-SA-4.00MIDIController-IO-MIDI
stefanhepp
150 × 100 mm45 parts2LCC-BY-SA-4.00NXP
MIDIController
stefanhepp
150 × 100 mm35 parts2LCC-BY-SA-4.00KeyboardScanner
stefanhepp
150 × 100 mm32 parts2LCC-BY-SA-4.00AVR/Arduino
PedalEncoder
stefanhepp
125 × 38.5 mm31 parts2LCC-BY-SA-4.00AVR/Arduino
PistonEncoder
stefanhepp
150 × 100 mm28 parts2LCC-BY-SA-4.00AVR/Arduino
TechnicsEncoder
stefanhepp
110 × 53 mm28 parts2LCC-BY-SA-4.00AVR/Arduino
KeyboardEncoder
stefanhepp
150 × 100 mm26 parts2LCC-BY-SA-4.00AVR/Arduino
ToeStudEncoder
stefanhepp
95 × 58 mm25 parts2LCC-BY-SA-4.00Panel-MainControl-Keypad
stefanhepp
142 × 72 mm22 parts2LCC-BY-SA-4.00AVR/Arduino
LEDController
stefanhepp
65 × 83 mm12 parts2LCC-BY-SA-4.00
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k