HardLabs

APMHat-4-powered

stephendade·AP-HAT·AP-HAT 1/APMHat-4-powered.kicad_pcb

APMHat-4-powered PCB layout, top view — open source board by stephendade
Simulate this board

About the APMHat-4-powered PCB

APMHat-4-powered is an open source PCB design by stephendade, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 65 × 30.5 mm, with 57 components from 42 distinct parts.

Other key parts include the CAT24C32, MCP3008, SC16IS752, TPS709 and TPS54360DDAR. By type, the board carries 17 resistors, 15 capacitors, 9 ICs, 7 connectors, 4 diodes and 2 transistors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Useful Raspberry Pi HATs for ArduPilot

This repository contains 3x archived hardware PCB designs for Raspberry Pi HAT's, created in KiCAD.

The Kakute HAT is an expansion board for the Raspberry Pi, which allows a KakuteF4 (non-AIO) to be interfaced (send telemetry to the Pi). Additionally, it contains breakout ports for RC In, GPS, Servo Out and others.

It contains a 5V, 2.5A power supply for the Raspberry Pi and has power switches for both the Kakute and Pi.

Main components on the APMHat-4-powered

CAT24C32MCP3008SC16IS752TPS709TPS54360DDARNC7SZ00P5XAP2127K-3.3NCP380MAX16054

APMHat-4-powered bill of materials (BOM)

57 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CAT24C32
U1
1
MCP3008
U2
1
SC16IS752
U3
1
TPS709
U4
1
TPS54360DDAR
U5
1
NC7SZ00P5X
U6
1
AP2127K-3.3
U7
1
NCP380
U8
1
MAX16054
U9
1
DMMT5401
Q1
1
DMG2305UX
Q2
1
14.7456MHz
Y1
1
40HAT
J1
1
Conn_01x02
J2
2
Conn_Telemetry
J3, J5
1
Conn_Telemetry
J4
1
Power_Pad
J6
1
Conn_01x04
J7
1
SW_Push
SW1
1
DIODE-SCHOTTKY
D1
Show 22 more
QtyPartRefs
1
LED
D2
1
30V
D3
1
40V
D4
1
10uH
L1
2
10uF, 50V
C1, C8
2
16pF, 50V
C3, C4
5
1.0UF-50V
C5, C6, C10, C15, C16
2
2.2UF-25V
C7, C17
1
10pF, 50V
C11
1
0.1uF, 16V
C12
1
3.3nF, 50V
C13
1
47uF, 10V
C14
3
3.9K
R1, R2, R11
3
10K
R3, R4, R6
1
47K
R5
3
100
R7, R15, R16
2
1K
R8, R9
1
143K
R12
1
30K
R13
1
63.4K
R14
1
300
R20
1
11.8K
R21

APMHat-4-powered design files

The KiCad project lives in the stephendade/AP-HAT repository on GitHub; these links point at the commit this page was built from.

APMHat-4-powered: common questions

How big is the APMHat-4-powered PCB?

The APMHat-4-powered measures 65 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the APMHat-4-powered?

57 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the APMHat-4-powered design files?

From the stephendade/AP-HAT repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the APMHat-4-powered design in my own project?

Yes, under the terms of its GPL-3.0 license, which stephendade chose for the repository.

More boards in AP-HAT

Similar boards