ARC Reactor

SuperMK15·ARC_Reactor_PCB

ARC Reactor PCB layout, top view — open source ESP32 board by SuperMK15

About the ARC Reactor PCB

ARC Reactor is an open source ESP32 PCB design by SuperMK15, published on GitHub. It is a 4-layer board measuring 67.9 × 70 mm, with 41 components from 21 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP63205WU, SN74AHCT1G125, LM66200DRLR and AP2112K-3.3. By type, the board carries 11 diodes, 10 capacitors, 8 resistors, 5 ICs, 4 connectors and 2 switches.

It belongs with the power & battery, iot & wireless and displays & leds designs in this gallery.

From the project

Wi-Fi controllable arc reactor board featuring an ESP32-C3-MINI-1, native USB flashing, a dual-diode power OR-ing circuit, and a 9-LED WS2812B addressable ring. Powered by a 2S–4S battery or USB-C.

Wi-Fi controllable arc reactor board featuring an ESP32-C3-MINI-1, native USB flashing, a dual-diode power OR-ing circuit, and a 9-LED WS2812B addressable ring. Powered by a 2S–4S battery or USB-C.

- ESP32-C3-MINI-1 module with onboard Wi-Fi - 9x WS2812B-B/W addressable RGB LEDs in a center-and-ring layout - Native USB-C interface for data flashing and 5V power input - Dual-diode power OR-ing circuit (LM66200) for seamless switching between USB and battery power - Wide-input synchronous step-down buck converter (AP63205) supporting 2S–4S LiPo inputs - Low-dropout regulator (AP2112K-3.3) for…

ARC Reactor, from the project README
From the project README

Main components on the ARC Reactor

ARC Reactor bill of materials (BOM)

41 components, 21 distinct parts.

QtyPartRefs
1
ESP32-C3-MINI-1
U1
1
AP63205WU
U2
1
SN74AHCT1G125
U3
1
LM66200DRLR
U4
1
AP2112K-3.3
U5
2
Conn_01x01
J1, J2
1
USB_C_Receptacle
J3
1
Conn_01x03
J4
2
SW_Push
SW1, SW2
1
SMAJ18A
D1
1
SMAJ5.0A
D2
9
WS2812B
D3, D4, D5, D6, D7, D8, D9, D10 +1
1
4.7uH
L1
1
10uF
C1
3
100nF
C2, C4, C8
3
1uF
C3, C9, C10
2
22uF
C5, C6
1
10uF
C7
5
10k
R1, R4, R5, R6, R8
2
5.1k
R2, R3
Show 1 more
QtyPartRefs
1
330
R7

ARC Reactor design files

The KiCad project lives in the SuperMK15/ARC_Reactor_PCB repository on GitHub; these links point at the commit this page was built from.

ARC Reactor: common questions

What microcontroller does the ARC Reactor use?

The ARC Reactor is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the ARC Reactor PCB?

The ARC Reactor measures 67.9 × 70 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the ARC Reactor?

41 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the ARC Reactor design files?

From the SuperMK15/ARC_Reactor_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ARC Reactor design in my own project?

The repository has no license, so all rights stay with SuperMK15. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ARC Reactor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards