RC vel controller

surya-shreevathsa11·RC_vel·hardware/controller/RC_vel_controller.kicad_pcb

RC vel controller PCB layout, top view — open source ESP32 board by surya-shreevathsa11

About the RC vel controller PCB

RC vel controller is an open source ESP32 PCB design by surya-shreevathsa11, published on GitHub. It is a 4-layer board measuring 85 × 57.8 mm, with 58 components from 32 distinct parts.

Its main chip is the WROOM-1, from the ESP32 family. Other key parts include the TP4056, DW01A, ME6211 and USBLC6. By type, the board carries 21 resistors, 17 capacitors, 8 switches, 5 ICs, 4 diodes and 2 connectors.

It belongs with the iot & wireless, power & battery and robotics & motion designs in this gallery.

From the project

Custom 1S ESP-NOW mini RC drift car — KiCad PCBs (car + controller) and ESP32-S3 firmware

Open RCvelcontroller.kicadpro in KiCad 10**.

No boost, motor driver, servo, lighting FETs, or hall gimbal.

Mounting: H1–H4, Ø2.2 mm M2 plated to GND.

Nets use global labels (same name = same net).

- B- ≠ GND (joined only through FS8205A) - All drive/MODE buttons are active-low with 10 kΩ pull-ups + 100 nF debounce

- Footprints placed per docs/layout-guide.md - Signal ratsnest remains — finish routing interactively before fab - Regenerate placement: python3 tools/routepcb.py - Regenerate schematic: python3 tools/buildwiredsch.py`

Main components on the RC vel controller

RC vel controller bill of materials (BOM)

58 components, 32 distinct parts.

QtyPartRefs
1
WROOM-1
U1
1
TP4056
U2
1
DW01A
U3
1
ME6211
U5
1
USBLC6
U7
1
FS8205A
Q1
1
USB-C
J1
1
BATTERY
J4
1
PWR
SW1
1
BOOT
SW2
1
RESET
SW3
1
MODE
SW4
1
FWD
SW5
1
BACK
SW6
1
LEFT
SW7
1
RIGHT
SW8
1
RED
D6
2
GREEN
D11, D12
1
AMBER
D13
2
4.7u
C1, C10
Show 12 more
QtyPartRefs
10
100n
C2, C5, C12, C17, C19, C21, C22, C23 +2
4
10u
C3, C4, C11, C18
1
1u
C20
2
5.1k
R1, R2
1
2.4k
R3
4
1k
R4, R19, R27, R28
1
100R
R5
1
1k
R6
1
100k
R7
2
220k
R20, R21
7
10k
R22, R23, R24, R25, R26, R31, R32
2
22R
R29, R30

RC vel controller design files

The KiCad project lives in the surya-shreevathsa11/RC_vel repository on GitHub; these links point at the commit this page was built from.

RC vel controller: common questions

What microcontroller does the RC vel controller use?

The RC vel controller is built around the WROOM-1, from the ESP32 family.

How big is the RC vel controller PCB?

The RC vel controller measures 85 × 57.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RC vel controller?

58 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the RC vel controller design files?

From the surya-shreevathsa11/RC_vel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RC vel controller design in my own project?

The repository has no license, so all rights stay with surya-shreevathsa11. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RC vel controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in RC_vel

Similar boards