RC vel car

surya-shreevathsa11·RC_vel·hardware/car/RC_vel_car.kicad_pcb

RC vel car PCB layout, top view — open source ESP32 board by surya-shreevathsa11

About the RC vel car PCB

RC vel car is an open source ESP32 PCB design by surya-shreevathsa11, published on GitHub. It is a 4-layer board measuring 46 × 32 mm, with 70 components from 40 distinct parts.

Its main chip is the WROOM-1, from the ESP32 family. Other key parts include the TP4056, DW01A, TPS61023, ME6211 and DRV8833. By type, the board carries 24 resistors, 22 capacitors, 7 ICs, 6 diodes, 4 connectors and 3 transistors.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

Custom 1S ESP-NOW mini RC drift car — KiCad PCBs (car + controller) and ESP32-S3 firmware

On-board LEDs: HEAD (D7/D8), REV (D9/D10), charge D6, status D11.

Mounting: H1–H4, Ø2.2 mm M2 plated pads tied to GND.

SW1: latching SPST pushbutton (same land as BOOT/RESET).

Nets use global labels (same name = same net). KiCad netlist check: all 50 nets / 232 pins match docs/connections.md. Controller: 0 ERC errors. Car: 2 expected ERC pintopin on paralleled DRV8833 outputs (A+B tied on purpose).

Main components on the RC vel car

RC vel car bill of materials (BOM)

70 components, 40 distinct parts.

QtyPartRefs
1
WROOM-1
U1
1
TP4056
U2
1
DW01A
U3
1
TPS61023
U4
1
ME6211
U5
1
DRV8833
U6
1
USBLC6
U7
1
FS8205A
Q1
2
2N7002
Q2, Q3
1
USB-C
J1
1
MOTOR
J2
1
SERVO
J3
1
BATTERY
J4
1
PWR
SW1
1
BOOT
SW2
1
RESET
SW3
3
RED
D6, D9, D10
2
WHITE
D7, D8
1
GREEN
D11
1
1uH
L1
Show 20 more
QtyPartRefs
2
4.7u
C1, C10
7
100n
C2, C5, C7, C12, C15, C17, C19
5
10u
C3, C4, C6, C11, C18
3
22u
C8, C9, C14
1
2.2u
C13
1
47u
C16
1
1u
C20
1
10n
C24
1
100u
C25
2
5.1k
R1, R2
1
3k
R3
3
1k
R4, R6, R19
3
100R
R5, R13, R17
4
100k
R7, R9, R14, R18
1
750k
R8
3
10k
R10, R22, R23
2
390R
R11, R12
2
620R
R15, R16
2
220k
R20, R21
1
0.10
R31

RC vel car design files

The KiCad project lives in the surya-shreevathsa11/RC_vel repository on GitHub; these links point at the commit this page was built from.

RC vel car: common questions

What microcontroller does the RC vel car use?

The RC vel car is built around the WROOM-1, from the ESP32 family.

How big is the RC vel car PCB?

The RC vel car measures 46 × 32 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RC vel car?

70 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the RC vel car design files?

From the surya-shreevathsa11/RC_vel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RC vel car design in my own project?

The repository has no license, so all rights stay with surya-shreevathsa11. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RC vel car without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in RC_vel

Similar boards