8 open source boards using the TPS2051CDBV
Real designs built with the TPS2051CDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Gk pcbv3
jncronin
108 × 158.8 mm276 parts6LNo license78Sbus to ztex
MelkhiorVintageComputing
99.7 × 83.8 mm61 parts4LCC-BY-NC-4.054Raspberry Pi
Cm5
YORROY123
170 × 120 mm221 parts4LMIT1FPGA
Zebra-X
Dylanfg123
90 × 60 mm423 parts10LNo license0Desktop-Hub
linuskjk
51.8 × 50.8 mm53 parts2LNo license0STM32
Gk
jncronin
120.7 × 110 mm245 parts6LNo license78PocketBeagle2Cape rev1
SuzieLinux
101.8 × 55.3 mm27 parts2LGPL-3.00AVR/Arduino
PocketBeagle2 cape
SuzieLinux
101.8 × 55.3 mm25 parts2LGPL-3.00
How designs wire the TPS2051CDBV
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS2051CDBV connects to, and the resistors, capacitors and other passives placed on it.
- The FLT pin is left unconnected on 5 of 6 designs.
- The IN pin is tied to 5V on 4 of 6 designs (a signal on 2).
- The EN pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: VBUS 50% · a signal 50% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FLTpin 3 | Connected to: Not connected 83% · a signal 17% | — |
| ENpin 4 | Connected to: Signal 83% · 3.3V 17% |
|
| INpin 5 | Connected to: 5V 67% · a signal 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gk by jncronin, Sbus to ztex by MelkhiorVintageComputing, Cm5 by YORROY123 and Zebra-X by Dylanfg123.
The TPS2051CDBV in open source designs
The gallery holds 8 open source boards using the TPS2051CDBV from 6 GitHub repositories; a typical one measures about 101.8 × 71.9 mm and carries around 141 components.
63% use four copper layers or more, and 38% carry an open source license.
The most starred is Gk pcbv3 by jncronin.
Microcontrollers on boards using the TPS2051CDBV
What boards using the TPS2051CDBV are built for
TPS2051CDBV: common questions
Where can I find a TPS2051CDBV reference design?
Each of the 8 boards on this page is a real design using the TPS2051CDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS2051CDBV FLT pin connected?
The FLT pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS2051CDBV.
How is the TPS2051CDBV IN pin connected?
The IN pin is tied to 5V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TPS2051CDBV.
How is the TPS2051CDBV EN pin connected?
The EN pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the TPS2051CDBV.
Which microcontrollers do boards using the TPS2051CDBV use?
Most are built on STM32 (2), AVR/Arduino (1), FPGA (1) and Raspberry Pi (1).
How big is a typical board using the TPS2051CDBV?
The median is 101.8 × 71.9 mm, and 38% are two-layer designs.
What is the most popular open source board using the TPS2051CDBV?
By GitHub stars, Gk pcbv3 by jncronin, with 78 stars.
Can I simulate one of these boards using the TPS2051CDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.