Esp32stepper

szf2020·esp32stepper·pcb/esp32stepper.kicad_pcb

Esp32stepper PCB layout, top view — open source ESP32 board by szf2020

About the Esp32stepper PCB

Esp32stepper is an open source ESP32 PCB design by szf2020, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 40 × 40 mm, with 67 components from 38 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the TMC2208-LA, BME280, TPS56339DDC, CH224K and MPU-6050. By type, the board carries 23 capacitors, 23 resistors, 6 ICs, 4 connectors, 4 switches and 3 diodes.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

Stepper motor controller using TMC2209, ESP32-S3 and USB-PD mountable onto any NEMA17 motor.

inspired by joshr120/PD-Stepper but being fully open hardware/software.

Stepper motor controller using silent Trinamic TMC2209, ESP32-S3 and USB-PD mountable onto any NEMA17 motor.

The complete BOM is available in different formats: - Excel - interactive HTML

All fabrication files needed to produce this PCB are located within the release package.

in the folder cad the spacers between motor and PCB, as well as the housing, can be found. One of the two spacer parts can be made out of metal to act as heatsink for the TMC2209.

Main components on the Esp32stepper

Esp32stepper bill of materials (BOM)

67 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TMC2208-LA
U2
1
BME280
U3
1
ESP32-S3-MINI-1
U4
1
TPS56339DDC
U5
1
CH224K
U6
1
MPU-6050
U7
2
IRLML9301
Q1, Q2
1
C160406
IO
J1
1
C160404
Qwiic_Vertical
J4
1
C19271361
Stepper
J5
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J9
1
C720648
Potentiometer
RV1
1
C221703
BOOT
SW1
1
C221703
RST
SW2
1
C221703
B1
SW3
1
C221703
B2
SW4
2
WS2812B-2020
D1, D2
1
C95872
D
D3
1
C1330726
4,7µH
L1
4
1µF
C2, C4, C11, C19
Show 18 more
QtyPartRefs
1
10UF
10uF
C3
2
100nF 35V
C5, C18
1
C915842
22nF 50V
C6
3
1µF 35V
C7, C9, C10
6
100nF
C8, C17, C20, C21, C22, C24
1
C22367827
10µF 35V
C12
1
C7432762
100nF 16V
C13
2
10µF
C14, C15
1
C4747966
100µF 35V
C16
1
C5119310
2,2nF 50V
C23
3
4k7
R1, R12, R21
2
20k
R2, R4
2
100m
R3, R11
1
2K7
2k7
R5
12
10k
R6, R7, R8, R10, R13, R15, R16, R17 +4
1
33K
33k
R9
1
30
R14
1
1k
R18

Esp32stepper design files

The KiCad project lives in the szf2020/esp32stepper repository on GitHub; these links point at the commit this page was built from.

Esp32stepper: common questions

What microcontroller does the Esp32stepper use?

The Esp32stepper is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Esp32stepper PCB?

The Esp32stepper measures 40 × 40 mm, has 4 copper layers and is 1.074 mm thick.

How many components are on the Esp32stepper?

67 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32stepper design files?

From the szf2020/esp32stepper repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32stepper design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which szf2020 chose for the repository.

Can I test firmware for the Esp32stepper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards