ESP32
Tanmayeers·Projects·PCB - Projects/ESP32/ESP32.kicad_pcb
About the ESP32 PCB
ESP32 is an open source ESP32 PCB design by Tanmayeers, published on GitHub. It is a 4-layer board measuring 100 × 80 mm, with 58 components from 32 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the USBLC6-2P6, CP2104, SI7021-A20, 74AHCT245 and LM1117DT-3.3. By type, the board carries 20 resistors, 15 capacitors, 6 ICs, 6 connectors, 4 diodes and 2 transistors.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
This repository contains the schematic for a custom ESP32 development board. The board is a 4-Layer design
This repository contains the schematic for a custom ESP32 development board. The board is a 4-Layer design
Features 1. QWI2C connector for I2C devices 2. Si7021 - I2C humidity and temperature sensor 3. RGB LED with a button 4. CP2104 - USB to serial UART and on-board programmmer 5. Power relay 6. Interface for LED strips, 4 level converted outputs 7. Fused power supply available on scew terminals 8. 3.2mm mounting holes (4)
Main components on the ESP32
ESP32 bill of materials (BOM)
58 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32D | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U2 |
| 1 | CP2104 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | SI7021-A20 Si7021-A20 | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U4 |
| 1 | 74AHCT245 | DIP-20_W7.62mm | U5 |
| 1 | LM1117DT-3.3 | TO-252-3_TabPin2 | U6 |
| 1 | UMH3N | SOT-363_SC-70-6 | Q1 |
| 1 | BC817 | SOT-23 | Q2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | CONN_01X04 Conn_01x04 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | SCREW_TERMINAL_01X03 Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | SCREW_TERMINAL_01X08 Screw_Terminal_01x08 | TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal | J4 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | Fuse | Fuse_Littelfuse-LVR200 | F1 |
| 1 | POLYFUSE_1A Polyfuse_1A | Fuse_Bourns_MF-RG300 | F2 |
| 1 | RT314A05 | Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K1 |
| 1 | SW_SPST | SW_SPST_PTS810 | SW1 |
| 1 | LL4148 | D_MiniMELF | D1 |
| 1 | YELLOW | LED_0603_1608Metric | D2 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_RGBA | LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D3 |
| 1 | 3.3V INDICATOR | LED_0603_1608Metric | D4 |
| 1 | BLM21PG221 | L_0603_1608Metric | FB1 |
| 1 | 1000U/25V 1000u/25V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 7 | 100N 100n | C_0402_1005Metric | C2, C5, C10, C12, C13, C14, C16 |
| 1 | 4U7 4u7 | C_0805_2012Metric | C3 |
| 6 | 22U 22u | C_0805_2012Metric | C4, C6, C8, C9, C11, C15 |
| 2 | 5K1 | R_0402_1005Metric | R1, R2 |
| 4 | 10K | R_0402_1005Metric | R3, R7, R13, R20 |
| 6 | 22R | R_0402_1005Metric | R4, R5, R16, R17, R18, R19 |
| 6 | 1K | R_0402_1005Metric | R6, R8, R9, R10, R14, R15 |
| 2 | 4K7 | R_0402_1005Metric | R11, R12 |
ESP32 design files
The KiCad project lives in the Tanmayeers/Projects repository on GitHub; these links point at the commit this page was built from.
ESP32: common questions
What microcontroller does the ESP32 use?
The ESP32 is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the ESP32 PCB?
The ESP32 measures 100 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32?
58 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 design files?
From the Tanmayeers/Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 design in my own project?
The repository has no license, so all rights stay with Tanmayeers. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Projects
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k