Pluto jtag adapter

teodor961·pluto_jtag_adapter·pluto_jtag_adapter/pluto_jtag_adapter.kicad_pcb

Pluto jtag adapter PCB layout, top view — open source board by teodor961

About the Pluto jtag adapter PCB

Pluto jtag adapter is an open source PCB design by teodor961, published on GitHub. It is a 2-layer board measuring 53 × 34.2 mm, with 64 components from 27 distinct parts.

Other key parts include the FT2232HL, AP2112K-3.3, AP2112K-1.8, 93LC46B and TXB0104D. By type, the board carries 24 capacitors, 23 resistors, 8 ICs, 4 connectors, 2 diodes and 2 inductors.

It belongs with the usb & debug tools designs in this gallery.

From the project

JTAG adapter board for the plutosdr board

JTAG programmer for the PLUTOSDR evaluation kit from ADI.

Main components on the Pluto jtag adapter

FT2232HL AP2112K-3.3 AP2112K-1.8 93LC46B TXB0104D TLV7031DBV WE-TVS-82400102 TXB0102DCU

Pluto jtag adapter bill of materials (BOM)

64 components, 27 distinct parts.

Qty	Part	Footprint	Refs
1	FT2232HL	LQFP-64_10x10mm_P0.5mm	U1
1	AP2112K-3.3	SOT-23-5	U2
1	AP2112K-1.8	SOT-23-5	U3
1	93LC46B	SOIC-8_3.9x4.9mm_P1.27mm	U4
1	TXB0104D	SOIC-14_3.9x8.7mm_P1.27mm	U6
1	TLV7031DBV	SOT-23-5	U7
1	WE-TVS-82400102	SOT-23-6	U8
1	TXB0102DCU	VSSOP-8_2.3x2mm_P0.5mm	U9
1	7M-12.000MAAJ-T	Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering	Y1
1	JTAG_UART_PLUTO	PinHeader_2x05_P1.27mm_Vertical	J1
1	Conn_01x08	PinHeader_1x08_P2.54mm_Vertical	J2
1	Conn_01x04	PinHeader_1x04_P2.54mm_Vertical	J3
1	USB_B_Micro	USB_Micro-B_Molex_47346-0001	J4
1	LTST-C190KSKT	LED_0603_1608Metric	D1
1	LTST-C190KGKT	LED_0603_1608Metric	D2
2	BLM18BA121SH1D	L_0603_1608Metric	FB1, FB2
20	100n	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1, C2, C3, C4, C5, C6, C7, C10 +12
2	4u7	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C8, C9
2	27p	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C12, C13
10	0	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1, R2, R3, R4, R11, R12, R20, R21 +2

Show 7 more

Qty	Part	Footprint	Refs
1	12K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R5
2	1K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R6, R19
1	2K2	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R7
5	10K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R8, R9, R10, R15, R17
2	220	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R13, R14
1	33	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R16
1	2K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R18

Pluto jtag adapter design files

The KiCad project lives in the teodor961/pluto_jtag_adapter repository on GitHub; these links point at the commit this page was built from.

Pluto jtag adapter: common questions

How big is the Pluto jtag adapter PCB?

The Pluto jtag adapter measures 53 × 34.2 mm, has 2 copper layers and is 1.600198 mm thick.

How many components are on the Pluto jtag adapter?

64 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pluto jtag adapter design files?

From the teodor961/pluto_jtag_adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pluto jtag adapter design in my own project?

The repository has no license, so all rights stay with teodor961. Use it as a reference, and ask the author before reusing the design.

Similar boards