Curl tracker

terryzhw·curl-tracker·design_files/curl_tracker.kicad_pcb

Curl tracker PCB layout, top view — open source ESP32 board by terryzhw

About the Curl tracker PCB

Curl tracker is an open source ESP32 PCB design by terryzhw, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 60 mm, with 51 components from 26 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the TPS63001, MCP73831-2-OT, BMI270 and USBLC6-2SC6. By type, the board carries 17 resistors, 16 capacitors, 5 ICs, 4 connectors, 3 switches and 3 diodes.

It belongs with the power & battery, rf & radio and iot & wireless designs in this gallery.

From the project

Curl Tracker is a wearable bicep curl tracker that uses an ESP32-C3 Super Mini alongside a MPU-6500 IMU to count reps, measure curl speed, and evaluate form in real-time. It uses a on-device classifier to distinguish good reps from common curl form faults. Curl Tracker displays l

Curl Tracker is a wearable bicep curl tracker that uses an ESP32-C3 Super Mini alongside a MPU-6500 IMU to count reps, measure curl speed, and evaluate form in real-time. It uses a on-device classifier to distinguish good reps from common curl form faults. Curl Tracker displays live rep metrics to a SSD1306 OLED and streams data over MQTT to be plotted on a Python/matplotlib client. It also provides haptic feedback and monitoring of device state.

Curl tracker, from the project README
From the project README

Main components on the Curl tracker

Curl tracker bill of materials (BOM)

51 components, 26 distinct parts.

QtyPartRefs
1
TPS63001
U1
1
ESP32-C3-MINI-1
U2
1
MCP73831-2-OT
U3
1
BMI270
U4
1
USBLC6-2SC6
U5
1
DMP2035
Q1
1
AO3400A
Q2
2
JST-PH
J1, J4
1
SSD1306 OLED
J3
1
USB_C_Receptacle_USB2.0_16P
J5
3
SW_Push
SW1, SW2, SW3
1
MBR120
D1
1
LED
D2
1
1N5819
D3
1
2.2uH
L1
6
10uF
C1, C2, C3, C4, C7, C9
1
1uF
C5
7
100nF
C6, C8, C10, C13, C14, C15, C16
2
4.7uF
C11, C12
3
100k
R1, R4, R5
Show 6 more
QtyPartRefs
2
100
R2, R15
6
10k
R3, R6, R9, R10, R16, R17
2
4.7k
R7, R8
2
5.1k
R11, R12
1
470
R13
1
5k
R14

Curl tracker design files

The KiCad project lives in the terryzhw/curl-tracker repository on GitHub; these links point at the commit this page was built from.

Curl tracker: common questions

What microcontroller does the Curl tracker use?

The Curl tracker is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the Curl tracker PCB?

The Curl tracker measures 50 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Curl tracker?

51 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Curl tracker design files?

From the terryzhw/curl-tracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Curl tracker design in my own project?

Yes, under the terms of its MIT license, which terryzhw chose for the repository.

Can I test firmware for the Curl tracker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards