40 open source boards using the 74LS05

Real designs built with the 74LS05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

40 boardsClear filters|Most starred

How designs wire the 74LS05

Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the 74LS05 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 15 of 26 designs, most often 100 nF (then 10 nF).
  • The A0 pin has a pull-up to 5V on 13 of 26 designs, most often 1 kΩ (then 4.7 kΩ).
  • The A2 pin has a pull-up to 5V on 13 of 26 designs, most often 10 kΩ (then 4.7 kΩ).
A0pin 2Connected to: Signal 96%
  • Pull-up to 5V on 50% · 1 kΩ (4), 4.7 kΩ (3), 3.3 kΩ (2)
A2pin 4Connected to: A connector 31% · not connected 15%
  • Pull-up to 5V on 50% · 10 kΩ (5), 4.7 kΩ (3), 1 kΩ (2)
A3pin 5Connected to: Signal 73%
  • Pull-up to 5V on 31% · 10 kΩ (3), 4.7 kΩ (2), 3.3 kΩ (1)
A8pin 12Connected to: A connector 23% · not connected 42%
  • Pull-up to 5V on 35% · 1 kΩ (5), 10 kΩ (1), 2.7 kΩ (1)
VCCpin 14Connected to: VCC 85%
  • Decoupling capacitor on 58% · 100 nF (12), 10 nF (2)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raemixx500 by SukkoPera, 68k-SBC by transistorfet, Unijoysticle 2 by ricardoquesada and Leako by barbeque.

The 74LS05 in open source designs

The gallery holds 40 open source boards using the 74LS05 from 27 GitHub repositories; a typical one measures about 180 × 134.6 mm and carries around 59 components.

92% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.

The most starred is Raemixx500 by SukkoPera.

Microcontrollers on boards using the 74LS05

74LS05: common questions

Where can I find a 74LS05 reference design?

Each of the 40 boards on this page is a real design using the 74LS05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS05 VCC pin?

The VCC pin has a decoupling capacitor on 15 of 26 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 26 open source designs using the 74LS05.

What pull-up resistor is used on the 74LS05 A0 pin?

The A0 pin has a pull-up to 5V on 13 of 26 designs, most often 1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 26 open source designs using the 74LS05.

What pull-up resistor is used on the 74LS05 A2 pin?

The A2 pin has a pull-up to 5V on 13 of 26 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 26 open source designs using the 74LS05.

What parts are used alongside the 74LS05?

The 74LS32, 74LS245, 74LS244, 74LS74 and 74LS00 appear in the most repositories here.

Which microcontrollers do boards using the 74LS05 use?

Most are built on ESP32 (2), NXP (1) and RP2040/RP2350 (1).

How big is a typical board using the 74LS05?

The median is 180 × 134.6 mm, and 92% are two-layer designs.

What is the most popular open source board using the 74LS05?

By GitHub stars, Raemixx500 by SukkoPera, with 313 stars.

Can I simulate one of these boards using the 74LS05 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part