Kraky
thesh4dows·Kraky·PCB/kraky.kicad_pcb
About the Kraky PCB
Kraky is an open source ESP32 PCB design by thesh4dows, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 94.5 × 98.5 mm, with 38 components from 25 distinct parts.
Its main chip is the esp32-s3, from the ESP32 family. Other key parts include the TP4056-42-ESOP8, RFM98W-433S2, MPU6050 and TSOP38238. By type, the board carries 9 capacitors, 7 resistors, 5 switches, 4 ICs, 4 connectors and 2 LEDs.
It belongs with the iot & wireless, power & battery and displays & leds designs in this gallery.
From the project
its a diy project of a device that emulates the flipper zero but using well available and cheap parts
Kraky is a DIY open-hardware project inspired by the Flipper Zero. It uses affordable parts and focuses on an educational, modular, and easy to repair aspect.
I started this journey with just a sketchbook and a lot of passion. The first thing i did was look up all the components and make a list, so i would have a clear path for the next steps. Then i've done the elettric schematic, once i redacted all the components i started with the elettric schematic and connecting all the components to outline the scheme for the PCB. Once i've connected all the components i've moved on making the PCB…
Main components on the Kraky
Kraky bill of materials (BOM)
38 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | ~ | esp32-s3 | U2 |
| 1 | RFM98W-433S2 | HOPERF_RFM9XW_THT | U3 |
| 1 | MPU6050 | MPU6050_Breakout | U4 |
| 1 | TSOP38238 | XDCR_TSOP38238 | A2 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | PINHD_1x10_Female | PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | JST_02 | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | PINHD_1x8_Female | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | CONUFL001-SMD-T | LINX_CONUFL001-SMD-T | J4 |
| 1 | Buzzer_5V | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | IA0305D | step up kraky | PS1 |
| 1 | RDM6300 | RDM6300 | RDM1 |
| 4 | Push_Button | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 1 | SW_Nidec_CAS-120A1 | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW5 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 1 | IR 940nm | LED_D5.0mm | IRLED1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | BLM21PG331SN1D | R_0805_2012Metric | L1 |
| 1 | 10 pF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 100 nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C2, C3, C4, C6, C7, C8, C10 |
| 1 | 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C5 |
| 2 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R9 |
| 1 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 4 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4, R5, R6 |
Kraky design files
The KiCad project lives in the thesh4dows/Kraky repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/kraky.kicad_pcb
- SchematicPCB/kraky.kicad_sch
- BOMPCB /BOM LIST.csv
Kraky: common questions
What microcontroller does the Kraky use?
The Kraky is built around the esp32-s3, from the ESP32 family.
How big is the Kraky PCB?
The Kraky measures 94.5 × 98.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kraky?
38 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kraky design files?
From the thesh4dows/Kraky repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kraky design in my own project?
Yes, under the terms of its GPL-3.0 license, which thesh4dows chose for the repository.
Can I test firmware for the Kraky without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k