17 open source boards using the 4070
Real designs built with the 4070, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Klangorium
hexagon5un
200 × 100 mm152 parts2LNo license65Drum H v2
Pl0p
100 × 100 mm96 parts2LNo license33Synbal
Bad-Dog-Designs
71 × 108 mm105 parts2LGPL-2.014Joytester
mistepien
80 × 100 mm38 parts2LGPL-3.02MXKeys
velvia-fifty
202.6 × 128.5 mm164 parts2LCC-BY-NC-4.01Compara4
ajjackson
78.7 × 104.1 mm64 parts2LNo license1Xol
0x007E
77.5 × 50.8 mm66 parts2LCC-BY-NC-4.00AC30
linuxha
173 × 97.5 mm65 parts2LNo license0- schematic only · 27 parts
4bit-CPU
nordinMunteanu
27 partsGPL-3.00 Mainboard
thehiddendatacentre
80 × 100 mm64 parts2LCC-BY-NC-4.04HacKeys
velvia-fifty
100 × 100 mm151 parts2LCC-BY-NC-4.01Laundry
velvia-fifty
100 × 100 mm145 parts2LCC-BY-NC-4.01Bumpstock
velvia-fifty
141.8 × 128.5 mm140 parts2LCC-BY-NC-4.01Logic Motor Driver
mekatronik-achmadi
68.6 × 33.9 mm15 parts2LNo license0DEitW
velvia-fifty
100 × 100 mm98 parts2LCC-BY-NC-4.01Ht hat cymbal cowbell
theWickedWebDev
30 × 100 mm36 parts2LNo license0Superstitious Acrobat
velvia-fifty
100 × 94 mm49 parts2LCC-BY-NC-4.01
How designs wire the 4070
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 4070 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 7 | Connected to: GND 91% | — |
| Pin 11 | Connected to: Signal 82% · not connected 18% |
|
| VDDpin 14 | Connected to: VCC 73% · a signal 18% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Klangorium by hexagon5un, Drum H v2 by Pl0p, Synbal by Bad-Dog-Designs and Mainboard by thehiddendatacentre.
The 4070 in open source designs
The gallery holds 17 open source boards using the 4070 from 12 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 66 components.
100% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is Klangorium by hexagon5un.
What boards using the 4070 are built for
4070: common questions
Where can I find a 4070 reference design?
Each of the 17 boards on this page is a real design using the 4070. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4070 VDD pin?
The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the 4070.
What parts are used alongside the 4070?
The 40106, TL074, 4015 and TL072 appear in the most repositories here.
How big is a typical board using the 4070?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 4070?
By GitHub stars, Klangorium by hexagon5un, with 65 stars.
Can I simulate one of these boards using the 4070 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.