HardLabs

MPCNC-Nano-Estlcam-Shield

tnn85·MPCNC-Nano-Estlcam-Shield

MPCNC-Nano-Estlcam-Shield layout, top view — open source AVR/Arduino board by tnn85
Simulate this board

About the MPCNC-Nano-Estlcam-Shield

MPCNC-Nano-Estlcam-Shield is an open source AVR/Arduino PCB design by tnn85, published on GitHub under the Custom license license. It is a 2-layer board measuring 160 × 100 mm, with 92 components from 32 distinct parts.

Its main chip is the Arduino Nano, from the AVR/Arduino family. Other key parts include the LM358, LTV-847, ULN2003, L7805 and ATtiny45-20PU. By type, the board carries 29 connectors, 18 resistors, 17 jumpers, 7 ICs, 7 diodes and 7 capacitors.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Ein CNC Shield für die MPCNC in Verwendung mit Estlcam

Falls Interesse an der Platine besteht und ihr diese nicht selbst fertigen (ätzen/fräsen) wollt oder könnt, bietet der Moderator der FB-Gruppe "Uncle Phil's Werkstatt" die Bausätze an. Ich habe nur ihm gestattet, die Platine anzubieten. Andere Bezugsquellen sind von mir nicht genehmigt.

"MPCNC Nano Estlcam Shield" "MPCNC": Richtet sich vorrangig (aber nicht nur) an Einsteiger in Thema CNC, die mit der MPCNC anfangen wollen und somit direkt die Kompatibiliät erkennen "Nano": Auf Arduino Nano basierend "Estlcam": Ist für die Verwendung mit Estlcam als Steuerungs- und CAM-Software zugeschnitten…

Main components on the MPCNC-Nano-Estlcam-Shield

LM358LTV-847ULN2003L7805ATtiny45-20PUArduino NanoPololu_Breakout_DRV8825LM2596_Step_Down_Module

MPCNC-Nano-Estlcam-Shield bill of materials (BOM)

92 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM358
U1
3
LTV-847
U2, U3, U4
1
ULN2003
U5
1
L7805
U6
1
ATtiny45-20PU
U7
1
Arduino Nano
A1
3
Pololu_Breakout_DRV8825
A2, A3, A4
1
LM2596_Step_Down_Module
A5
3
Screw_Terminal_01x02
J1, J16, J17
1
Conn_01x03_Male
J2
1
Conn_01x06_Male
J3
16
Screw_Terminal_01x03
J4, J5, J6, J12, J13, J14, J18, J19 +8
5
Conn_01x04_Male
J7, J8, J9, J10, J11
1
Conn_02x03_Odd_Even
J15
1
Conn_01x03_Male
J28
1
Conn_01x02_Male
J29
1
Heatsink 7805
HS1
15
Jumper_NO_Small
JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +7
2
Jumper_3_Open
JP13, JP14
1
5k
RV1
Show 12 more
QtyPartRefs
1
LED RED
D1
2
1N5822
D2, D3
1
LED GREEN
D4
3
LED CLEAR/RED
D5, D6, D7
4
100µF
C1, C2, C3, C4
1
0,33µF
C5
1
0,1µF
C6
1
100n
C7
4
1k
R1, R16, R17, R18
3
10k
R2, R3, R13
10
220
R4, R5, R6, R7, R8, R9, R10, R11 +2
1
1.8k
R15

MPCNC-Nano-Estlcam-Shield design files

The KiCad project lives in the tnn85/MPCNC-Nano-Estlcam-Shield repository on GitHub; these links point at the commit this page was built from.

MPCNC-Nano-Estlcam-Shield: common questions

What microcontroller does the MPCNC-Nano-Estlcam-Shield use?

The MPCNC-Nano-Estlcam-Shield is built around the Arduino Nano, from the AVR/Arduino family.

How big is the MPCNC-Nano-Estlcam-Shield?

The MPCNC-Nano-Estlcam-Shield measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MPCNC-Nano-Estlcam-Shield?

92 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MPCNC-Nano-Estlcam-Shield design files?

From the tnn85/MPCNC-Nano-Estlcam-Shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the MPCNC-Nano-Estlcam-Shield design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the MPCNC-Nano-Estlcam-Shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards