Common Control

Tomoshibi-technology·Tomoshibi_Circuit·RCJ_OnStage/Common_Control/Common_Control.kicad_pcb

Common Control PCB layout, top view — open source STM32 board by Tomoshibi-technology

About the Common Control PCB

Common Control is an open source STM32 PCB design by Tomoshibi-technology, published on GitHub under the MIT license. It is a 2-layer board measuring 110 × 120 mm, with 219 components from 56 distinct parts.

Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the CH340E, TWE-L-WX, 74LVC1G32, AZ1084CD-3.3 and NJU72501_MODULE. By type, the board carries 84 resistors, 35 capacitors, 29 transistors, 19 connectors, 19 diodes and 16 switches.

From the project

燈のプロダクト達を動かしている基板開発用リポジトリ

Main components on the Common Control

Common Control bill of materials (BOM)

219 components, 56 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340E
U1
1
TWE-L-WX
U2
1
74LVC1G32
U3
1
AZ1084CD-3.3
U4
1
STM32F446RETX
STM32F446RETx
U5
1
NJU72501_MODULE
NJU72501_Module
U6
1
OLED_akitsuki
U7
2
MAX3485
U8, U9
2
Q_PMOS_GDS
Q1, Q4
2
SSM6J808R
Q2, Q6
6
C2844873
Q_NMOS_GSD
Q3, Q5, Q20, Q21, Q22, Q23
8
Q_PNP_BEC
Q7, Q9, Q10, Q12, Q16, Q19, Q28, Q29
11
Q_PMOS_GSD
Q8, Q11, Q13, Q14, Q15, Q17, Q18, Q24 +3
1
CONN_01X07_FEMALE
Conn_01x07_Female
J1
4
CONN_01X02_FEMALE
Conn_01x02_Female
J2, J3, J4, J5
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J6
1
CONN_01X10_FEMALE
Conn_01x10_Female
J7
10
CONN_01X03_FEMALE
Conn_01x03_Female
J8, J9, J10, J11, J16, J17, J18, J19 +2
2
CONN_01X05_FEMALE
Conn_01x05_Female
J22, J23
1
JUMPER_2_OPEN
Jumper_2_Open
JP1
Show 36 more
QtyPartRefs
1
Speaker
LS1
1
OKL-T/6-W12N-C
MD1
1
R_Potentiometer
RV1
1
SW_DPDT_X2
SW_DPDT_x2
SW1
7
SW_SPST
SW2, SW3, SW6, SW9, SW10, SW11, SW12
2
SW_DIP_X02
SW_DIP_x02
SW4, SW14
1
SW_DPDT_X2
SW_DPDT_x2
SW5
4
SW_SPDT
SW7, SW8, SW15, SW16
1
SW_DIP_X04
SW_DIP_x04
SW13
4
TestPoint
TP1, TP3, TP4, TP5
1
Yellow
D1
6
D
D2, D3, D7, D8, D9, D10
1
MA10EB045
D4
5
Red
D5, D6, D12, D13, D14
2
D_Zener
D11, D15
4
Green
D16, D17, D18, D19
18
0.1UF
0.1uF
C1, C3, C4, C5, C11, C12, C15, C16 +10
2
10UF
10uF
C2, C10
3
4.7UF
4.7uF
C6, C7, C24
5
1UF
1uF
C8, C13, C17, C25, C30
1
22UF
22uF
C9
2
ADJ_ST
C14, C23
4
470UF
470uF
C26, C27, C28, C29
48
10K
10k
R1, R2, R3, R4, R8, R9, R10, R11 +40
2
5.1K
5.1k
R5, R6
17
1k
R7, R13, R15, R18, R20, R21, R25, R37 +9
2
V_Divider
R16, R17
1
100K
100k
R24
1
330
R26
1
10
R27
1
1.2k
R28
2
R
R61, R62
2
7.5K
7.5k
R76, R77
2
20K
20k
R78, R79
4
2.2K
2.2k
R80, R81, R82, R83
1
120
R84

Common Control design files

The KiCad project lives in the Tomoshibi-technology/Tomoshibi_Circuit repository on GitHub; these links point at the commit this page was built from.

Common Control: common questions

What microcontroller does the Common Control use?

The Common Control is built around the STM32F446RETX, from the STM32 family.

How big is the Common Control PCB?

The Common Control measures 110 × 120 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Common Control?

219 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Common Control design files?

From the Tomoshibi-technology/Tomoshibi_Circuit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Common Control design in my own project?

Yes, under the terms of its MIT license, which Tomoshibi-technology chose for the repository.

Can I test firmware for the Common Control without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Tomoshibi_Circuit

Similar boards