13 open source boards using the AZ1084CD-3.3
Real designs built with the AZ1084CD-3.3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Mother Ctrl
Tomoshibi-technology
100 × 60 mm248 parts2LMIT1
STM32IR
96 × 138 mm190 parts2LMIT1
STM32Common Control
110 × 120 mm219 parts2LMIT0
ESP32Pole
100 × 70 mm181 parts2LMIT1
STM32Main
110 × 120 mm200 parts2LMIT0
STM32LargeMD
110 × 60 mm148 parts2LMIT1
STM32BLDC Ver1
131.6 × 167 mm165 parts2LMIT0
STM32SmallMD
90 × 40 mm142 parts2LMIT1
STM32Motordriver
125 × 70 mm131 parts2LMIT0
STM32Panel
90 × 62 mm118 parts2LMIT1
Power
110 × 120 mm91 parts2LMIT0
STM32Encoder
50 × 40 mm57 parts2LMIT1
Ver1
65.3 × 52.7 mm42 parts2LMIT0
The AZ1084CD-3.3 in open source designs
The gallery holds 13 open source boards using the AZ1084CD-3.3 from 2 GitHub repositories; a typical one measures about 100 × 70 mm and carries around 148 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Mother Ctrl by Tomoshibi-technology.
Parts used alongside the AZ1084CD-3.3
What boards using the AZ1084CD-3.3 are built for
AZ1084CD-3.3: common questions
Where can I find a AZ1084CD-3.3 reference design?
Each of the 13 boards on this page is a real design using the AZ1084CD-3.3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AZ1084CD-3.3?
The CH340E, IR2302, MAX3485, STM32F446RETX and TWE-L-WX appear in the most repositories here.
Which microcontrollers do boards using the AZ1084CD-3.3 use?
Most are built on STM32 (10) and ESP32 (1).
How big is a typical board using the AZ1084CD-3.3?
The median is 100 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the AZ1084CD-3.3?
By GitHub stars, Mother Ctrl by Tomoshibi-technology, with 1 stars.
Can I simulate one of these boards using the AZ1084CD-3.3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.