23 open source boards using the 74LVC1G32
Real designs built with the 74LVC1G32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
GB-BENCH-G1
Gekkio
100 × 100 mm98 parts4LCC-BY-4.0379K30 SBC
transistorfet
160 × 100 mm87 parts4LGPL-3.069CIDER
LIV2
74.9 × 57.2 mm68 parts4LGPL-2.011Microchip SAM
Pico pi rel
bristol-seds
65 × 30 mm96 parts4LMIT2Tia fpga
lrrosa
61.6 × 34.5 mm24 parts2LCERN-OHL-S-2.02STM32
Svelotracker
SL-RU
98.6 × 49.8 mm102 parts2LNo license1STM32
Schematics v11
roberto314
100 × 100 mm89 parts2LBSD-2-Clause0Research
kalebwu41
52 × 35 mm33 parts2LNo license0CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.06AVR/Arduino
Digital board
minisystem
200 × 150 mm237 parts2LNo license3STM32
Common Control
Tomoshibi-technology
110 × 120 mm219 parts2LMIT0STM32
RamRomBoard
roberto314
100 × 100 mm86 parts2LBSD-2-Clause0RP2040/RP2350
Ir transmitter
adeboni
114.3 × 25.4 mm81 parts2LNo license0PIC
GB-MBCTEST
Gekkio
51.4 × 61 mm32 parts2LCC-BY-4.0379Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06STM32
RAMROM 512k board
roberto314
100 × 100 mm54 parts2LNo license1STM32
Main
Tomoshibi-technology
110 × 120 mm200 parts2LMIT0Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06STM32
BLDC Ver1
Tomoshibi-technology
131.6 × 167 mm165 parts2LMIT0STM32
Motordriver
Tomoshibi-technology
125 × 70 mm131 parts2LMIT0Power
Tomoshibi-technology
110 × 120 mm91 parts2LMIT0VGAVDG
flypie
270.5 × 147.3 mm85 parts2LGPL-3.013Ver1
Tomoshibi-technology
65.3 × 52.7 mm42 parts2LMIT0
How designs wire the 74LVC1G32
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74LVC1G32 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 13 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 86% | — |
| VCCpin 5 | Connected to: 3.3V 86% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GB-BENCH-G1 by Gekkio, K30 SBC by transistorfet, VGAVDG by flypie and CIDER by LIV2.
The 74LVC1G32 in open source designs
The gallery holds 23 open source boards using the 74LVC1G32 from 14 GitHub repositories; a typical one measures about 110 × 100 mm and carries around 91 components.
74% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.
The most starred is GB-BENCH-G1 by Gekkio.
Parts used alongside the 74LVC1G32
Microcontrollers on boards using the 74LVC1G32
What boards using the 74LVC1G32 are built for
74LVC1G32: common questions
Where can I find a 74LVC1G32 reference design?
Each of the 23 boards on this page is a real design using the 74LVC1G32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1G32 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 13 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 14 open source designs using the 74LVC1G32.
What parts are used alongside the 74LVC1G32?
The 74HC165, 74HC590, 74LVC1G17, 74AHC1G14 and 74HC138 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G32 use?
Most are built on STM32 (8), PIC (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the 74LVC1G32?
The median is 110 × 100 mm, and 74% are two-layer designs.
What is the most popular open source board using the 74LVC1G32?
By GitHub stars, GB-BENCH-G1 by Gekkio, with 379 stars.
Can I simulate one of these boards using the 74LVC1G32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.