SystemBoardPLCC

transistorfet·retroverse·components/systemboard/hardware/SystemBoardPLCC/SystemBoardPLCC.kicad_pcb

SystemBoardPLCC PCB layout, top view — open source board by transistorfet

About the SystemBoardPLCC PCB

SystemBoardPLCC is an open source PCB design by transistorfet, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 31 components from 17 distinct parts.

Other key parts include the ATF1508AS-10JU84, 74HC14 and VME64-P1-3R. By type, the board carries 12 capacitors, 8 resistors, 3 ICs, 3 connectors, 2 diodes and 1 crystal.

It belongs with the retro computing designs in this gallery.

From the project

A collection of VME-based hardware and software for modular computers

A somewhat generic card with an ATF1508 programmable logic device, which is intended to act as the system board of the VME bus, handling the resolution and granting of the bus during bus arbitration, and interrupt acknowledging. It has a clock and a reset button, which can be programmed in the logic to reset all devices on the bus.

I have not actually built this version of the card, and instead built the SystemBoardSMT after finding out that the PLCC version of the ATF1508AS was End-of-Life, and out of stock at Digikey and Mouser. It should work, but I'd recommend comparing the signals to…

Main components on the SystemBoardPLCC

ATF1508AS-10JU8474HC14VME64-P1-3R

SystemBoardPLCC bill of materials (BOM)

31 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATF1508AS-10JU84
U1
1
74HC14
U2
1
VME64-P1-3R
U3
1
Crystal
Y1
2
5V
J1, J2
1
JTAG
J3
1
RESET
SW1
1
Ground Loop
TP1
1
POWER
D1
1
STATUS
D2
9
0.1uF
C1, C2, C3, C4, C5, C7, C8, C9 +1
1
4.7uF
C6
2
18pF
C10, C11
3
4.7k
R1, R2, R4
2
220
R3, R6
2
10k
R5, R8
1
15k
R7

SystemBoardPLCC design files

The KiCad project lives in the transistorfet/retroverse repository on GitHub; these links point at the commit this page was built from.

SystemBoardPLCC: common questions

How big is the SystemBoardPLCC PCB?

The SystemBoardPLCC measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SystemBoardPLCC?

31 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SystemBoardPLCC design files?

From the transistorfet/retroverse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SystemBoardPLCC design in my own project?

Yes, under the terms of its MIT license, which transistorfet chose for the repository.

More boards in retroverse

Similar boards