TestProject 02
Turboblider55·Project_OpenGauge·mechanical/KiCAD/OBD_PCB/TestProject_02.kicad_pcb
About the TestProject 02 PCB
TestProject 02 is an open source ESP32 PCB design by Turboblider55, published on GitHub. It is a 4-layer board measuring 41 × 59.1 mm, with 40 components from 28 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the TPS54302, USBLC6-2P6 and SN65HVD231. By type, the board carries 12 resistors, 10 capacitors, 9 diodes, 4 ICs, 1 connector and 1 fuse.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
Modular Vehicle Telemetry and Infotainment Companion via OBD-II
Kétegységes, vezeték nélküli műszerfal valós idejű járműdiagnosztikához.
Az OpenGauge egy BSc-szakdolgozati projekt: a jármű diagnosztikai adatainak beolvasását és megjelenítését két külön egységre bontja, amelyeket vezeték nélküli kapcsolat köt össze. Egyetlen, kijelzővel ellátott OBD-II dongle helyett két, a feladatára készült egység készül:
- OBD-egység: az OBD-II csatlakozóba dugott kis panel, amely a jármű CAN-buszáról olvassa a diagnosztikai adatokat, és a járműről kapja a tápfeszültségét. - Kijelzőegység: a műszerfalra vagy a szellőzőrácsra szerelhető, kerek érintőkijelzős egység…

Main components on the TestProject 02
TestProject 02 bill of materials (BOM)
40 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | TPS54302 | SOT-23-6 | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | SN65HVD231 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | SW_MEC_5E | SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | BOOT2, EN1 |
| 1 | Polyfuse | Fuse_0805_2012Metric | F1 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 1 | SS14 | D_SMA | D2 |
| 2 | LED_G | LED_0805_2012Metric | D3, D5 |
| 1 | SMAJ24A | D_SMA | D4 |
| 1 | LED_B | LED_0805_2012Metric | D6 |
| 1 | LED_R | LED_0805_2012Metric | D7 |
| 1 | SS34 | D_SMA | D8 |
| 1 | NUP2105L | SOT-23 | D9 |
| 1 | 10uH | L_Sunlord_SWPA5040S | L1 |
| 2 | 100nF | C_0805_2012Metric | C2, C3 |
| 3 | 10uF | C_0805_2012Metric | C4, C4A1, C7 |
| 2 | 100nF | C_0603_1608Metric | C4B1, C5 |
| 2 | 22uF | C_0805_2012Metric | C6A1, C6B1 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7nF | C_0603_1608Metric | C8 |
| 3 | 10k | R_0805_2012Metric | R1, R3, R7 |
| 1 | 45.3K | R_0805_2012Metric | R2 |
| 2 | 5.1K | R_0805_2012Metric | R4, R5 |
| 1 | 1M | R_0805_2012Metric | R6 |
| 1 | 1.5K | R_0805_2012Metric | R8 |
| 1 | 100R | R_0603_1608Metric | R10 |
| 3 | 330R | R_0603_1608Metric | R11, R12, R13 |
TestProject 02 design files
The KiCad project lives in the Turboblider55/Project_OpenGauge repository on GitHub; these links point at the commit this page was built from.
TestProject 02: common questions
What microcontroller does the TestProject 02 use?
The TestProject 02 is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the TestProject 02 PCB?
The TestProject 02 measures 41 × 59.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TestProject 02?
40 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the TestProject 02 design files?
From the Turboblider55/Project_OpenGauge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TestProject 02 design in my own project?
The repository has no license, so all rights stay with Turboblider55. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TestProject 02 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Project_OpenGauge
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k