Display

Turboblider55·Project_OpenGauge·mechanical/KiCAD/DISPLAY_PCB/display_pcb/display_pcb.kicad_pcb

Display PCB layout, top view — open source ESP32 board by Turboblider55

About the Display PCB

Display is an open source ESP32 PCB design by Turboblider55, published on GitHub. It is a 4-layer board measuring 49.9 × 56.4 mm, with 45 components from 28 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2P6, TP4056-42-ESOP8 and TLV75733PDBV. By type, the board carries 15 resistors, 11 capacitors, 8 diodes, 4 ICs, 3 connectors and 1 transistor.

It belongs with the power & battery, iot & wireless and displays & leds designs in this gallery.

From the project

Modular Vehicle Telemetry and Infotainment Companion via OBD-II

Kétegységes, vezeték nélküli műszerfal valós idejű járműdiagnosztikához.

Az OpenGauge egy BSc-szakdolgozati projekt: a jármű diagnosztikai adatainak beolvasását és megjelenítését két külön egységre bontja, amelyeket vezeték nélküli kapcsolat köt össze. Egyetlen, kijelzővel ellátott OBD-II dongle helyett két, a feladatára készült egység készül:

- OBD-egység: az OBD-II csatlakozóba dugott kis panel, amely a jármű CAN-buszáról olvassa a diagnosztikai adatokat, és a járműről kapja a tápfeszültségét. - Kijelzőegység: a műszerfalra vagy a szellőzőrácsra szerelhető, kerek érintőkijelzős egység…

Display, from the project README
From the project README

Main components on the Display

Display bill of materials (BOM)

45 components, 28 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
USBLC6-2P6
U3
1
TP4056-42-ESOP8
U4
1
TLV75733PDBV
U5
1
AO3401A
Q1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x18_Socket
J2
1
Conn_01x02_Pin
J5
2
SW_MEC_5E
BOOT1, EN1
1
Polyfuse
F1
2
LED_R
D1, D6
1
SMAJ5.0A
D2
2
LED_G
D3, D7
1
LED_B
D4
2
SS14
D5, D8
1
4.7nF
C2
5
10uF
C3, C7, C8, C9, C10
3
100nF
C4, C6, C11
1
22uF
C5
1
10nF
C13
Show 8 more
QtyPartRefs
2
5.1K
R2, R3
1
1M
R4
3
330R
R5, R6, R7
2
10K
R8, R10
1
100R
R9
3
100K
R17, R23, R24
1
2.4K
R18
2
1K
R19, R20

Display design files

The KiCad project lives in the Turboblider55/Project_OpenGauge repository on GitHub; these links point at the commit this page was built from.

Display: common questions

What microcontroller does the Display use?

The Display is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Display PCB?

The Display measures 49.9 × 56.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Display?

45 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Display design files?

From the Turboblider55/Project_OpenGauge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Display design in my own project?

The repository has no license, so all rights stay with Turboblider55. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Display without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Project_OpenGauge

Similar boards