5 open source boards using the LM2675M-5

Real designs built with the LM2675M-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LM2675M-5

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM2675M-5 connects to, and the resistors, capacitors and other passives placed on it.

  • The CB pin has a series capacitor on 5 of 5 designs, most often 10 nF.
  • The VSW pin has a series capacitor on 5 of 5 designs, most often 10 nF.
  • The VSW pin has a inductor on 5 of 5 designs, most often 47 µH (then 68 µH).
  • The FB pin is tied to 5V on 5 of 5 designs.
CBpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (5)
NCpin 2, 3Connected to: Not connected 100%
FBpin 4Connected to: 5V 100%
ON/OFFpin 5Connected to: Not connected 60% · 24V 20% · a signal 20%
GNDpin 6Connected to: GND 100%
VINpin 7Connected to: VCC 100%
VSWpin 8Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (5)
  • Inductor on 100% · 47 µH (3), 68 µH (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Retrospector Components by dchwebb, FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32 by mnemocron, Antdroid board by antdroid-hexapod and CNC Buck by JasonClock.

The LM2675M-5 in open source designs

The gallery holds 5 open source boards using the LM2675M-5 from 5 GitHub repositories; a typical one measures about 63 × 63 mm and carries around 78 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Retrospector Components by dchwebb.

Microcontrollers on boards using the LM2675M-5

LM2675M-5: common questions

Where can I find a LM2675M-5 reference design?

Each of the 5 boards on this page is a real design using the LM2675M-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM2675M-5 CB pin connected?

The CB pin has a series capacitor on 5 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the LM2675M-5.

How is the LM2675M-5 VSW pin connected?

The VSW pin has a series capacitor on 5 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the LM2675M-5.

How is the LM2675M-5 FB pin connected?

The FB pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM2675M-5.

Which microcontrollers do boards using the LM2675M-5 use?

Most are built on STM32 (3), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the LM2675M-5?

The median is 63 × 63 mm, and 60% are two-layer designs.

What is the most popular open source board using the LM2675M-5?

By GitHub stars, Retrospector Components by dchwebb, with 18 stars.

Can I simulate one of these boards using the LM2675M-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part