Stepper synth

udu3324·stepper-synth·pcb/steppersynth/steppersynth.kicad_pcb

Stepper synth PCB layout, top view — open source ESP32 board by udu3324

About the Stepper synth PCB

Stepper synth is an open source ESP32 PCB design by udu3324, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 266.7 × 81 mm, with 182 components from 36 distinct parts.

Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. Other key parts include the LM3940IMPX-3.3/NOPB, TMC2209-LA, DRV5055A3XDBZXQ1, MCP6002-XMC and CD74HC4067M. By type, the board carries 83 capacitors, 49 ICs, 27 resistors, 9 diodes, 8 connectors and 6 switches.

It belongs with the robotics & motion, audio and test & measurement designs in this gallery.

From the project

An electronic instrument that uses stepper motors to make music

An electronic instrument that uses stepper motors to make music. Powered by the esp32 ecosystem, it is a synthesizer with 3 octaves with velocity support using hall effect sensors. It is inspired by the musician/engineer Love Hultén.

There's so many electronic instruments that make sounds purely through cables and rely on other devices to output to them. Instead, what if I used the power of stepper motors to make sound and create a standalone device? I notice how harmonic these motors could be while 3d printing, they sometimes have a noticable pattern and variable pitch that can be utilized.

Stepper synth, from the project README
From the project README

Main components on the Stepper synth

Stepper synth bill of materials (BOM)

182 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-2
U1
1
LM3940IMPX-3.3/NOPB
U2
4
TMC2209-LA
U3, U4, U5, U6
36
DRV5055A3XDBZXQ1
DRV5055A3xDBZxQ1
U7, U8, U9, U10, U11, U12, U13, U14 +28
3
MCP6002-XMC
MCP6002-xMC
U43, U44, U47
3
CD74HC4067M
U45, U46, U48
1
TPS2115APW
U49
1
USB4105
J1
1
LRS-350-24
J2
4
CONN_01X04_PIN
Conn_01x04_Pin
J3, J4, J5, J6
1
CONN_01X02_PIN
Conn_01x02_Pin
J8
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J9
1
SW_SPST
SW1
3
RotaryEncoder_Switch
SW2, SW5, SW6
2
SW_PUSH_45DEG
SW_Push_45deg
SW3, SW4
1
SS14
D1
8
WS2812B
D2, D3, D4, D5, D6, D7, D8, D9
1
1UF
1uF
C1
1
10μF
C2
4
0.1μF
C3, C4, C82, C83
Show 16 more
QtyPartRefs
1
0.47μF
C5
1
47μF
C6
22
100NF
100nF
C7, C8, C12, C14, C20, C21, C26, C63 +14
4
150µF
C9, C10, C19, C25
4
2.2µF
C11, C16, C22, C78
4
22NF
22nF
C13, C17, C23, C79
4
4.7µF
C15, C18, C24, C80
36
0.01µF
C27, C28, C29, C30, C31, C32, C33, C34 +28
1
4.7μF
C81
6
10kΩ
R1, R2, R11, R12, R13, R26
2
0Ω
R3, R4
2
5.1kΩ
R5, R6
4
20kΩ
R7, R9, R22, R24
4
1kΩ
R8, R10, R23, R25
8
220Ω
R14, R15, R16, R17, R18, R19, R20, R21
1
100kΩ
R27

Stepper synth design files

The KiCad project lives in the udu3324/stepper-synth repository on GitHub; these links point at the commit this page was built from.

Stepper synth: common questions

What microcontroller does the Stepper synth use?

The Stepper synth is built around the ESP32-S3-WROOM-2, from the ESP32 family.

How big is the Stepper synth PCB?

The Stepper synth measures 266.7 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stepper synth?

182 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stepper synth design files?

From the udu3324/stepper-synth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stepper synth design in my own project?

Yes, under the terms of its GPL-3.0 license, which udu3324 chose for the repository.

Can I test firmware for the Stepper synth without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards