Graphics gremlin
Vakon84·graphics-gremlin
About the Graphics gremlin PCB
Graphics gremlin is an open source FPGA PCB design by Vakon84, published on GitHub. It is a 2-layer board measuring 106.4 × 95 mm, with 94 components from 31 distinct parts.
Its main chip is the ICE40HX4K-TQ144, from the FPGA family. Other key parts include the SST26VF080A-104I/SN, 74ALVC164245, ADA4891-3, IS61C5128AL-10KLI and AP2114HA-3.3. By type, the board carries 41 resistors, 31 capacitors, 11 ICs, 6 connectors, 2 crystals and 1 fuse.
From the project
The Graphics Gremlin is an FPGA-based ISA video card specifically designed to emulate certain old video standards. This initial release emulates the original IBM PC monochrome graphics adapter (MDA) as well as the original IBM color graphics adapter (CGA). Since the logic is defi
The Graphics Gremlin is an FPGA-based ISA video card specifically designed to emulate certain old video standards. This initial release emulates the original IBM PC monochrome graphics adapter (MDA) as well as the original IBM color graphics adapter (CGA). Since the logic is defined by the bitstream loaded into the FPGA, new emulations may be available in the future to support other video standards.

Main components on the Graphics gremlin
Graphics gremlin bill of materials (BOM)
94 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40HX4K-TQ144 | TSQFP50P2200X2200X160-144 | U1 |
| 1 | SST26VF080A-104I/SN | SOP127P620X175-8 | U2 |
| 3 | 74ALVC164245 | TSSOP50P810X120-48 | U3, U4, U5 |
| 1 | ADA4891-3 | SOP127P620X175-14 | U6 |
| 1 | IS61C5128AL-10KLI | SOJ127P1118X376-36 | U7 |
| 1 | AP2114HA-3.3 | SOT230P700X170-3 | U8 |
| 1 | AP2114HA-1.2 | SOT230P700X170-3 | U9 |
| 1 | APX803S00-29SA-7 | SOT95P230X117-3 | U10 |
| 1 | 74HCT125 | TSOP65P640X110-14 | U11 |
| 1 | 10MHz | XTAL320X250X120-4 | X1 |
| 1 | 14.318MHz | XTAL320X250X120-4 | X2 |
| 1 | PROG | Pin_Header_Straight_2x04_Pitch2.54mm | J1 |
| 1 | DE15 | DB15HDFC | J2 |
| 1 | NTSC | KOBICONN_161-03X0-E | J3 |
| 1 | DE9 | DB9FC2 | J4 |
| 1 | Conn_ISA_8bit | BUS_PC_8BIT | J5 |
| 1 | RFMOD | Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | 1A | RESC3216X70 | F1 |
| 1 | MNT_KEYSTONE_9200 | MNT_KEYSTONE_9200 | MH1 |
| 1 | SW_DIP_x04 | SW_DIP254P762X635-8 | SW1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 23 | 1u | CAPC1608X100 | C1, C7, C8, C9, C10, C11, C13, C14 +15 |
| 8 | 4.7u | CAPC1608X100 | C2, C3, C4, C5, C6, C12, C18, C19 |
| 13 | 10K | RESC1608X55 | R1, R2, R3, R4, R5, R8, R9, R14 +5 |
| 5 | 10 | RESC1608X55 | R6, R7, R10, R25, R26 |
| 1 | DNI | RESC1608X55 | R11 |
| 3 | 100 | RESC1608X55 | R12, R21, R22 |
| 1 | 1K | RESC1608X55 | R13 |
| 5 | 75 | RESC1608X55 | R16, R17, R18, R19, R31 |
| 3 | 237 | RESC1608X55 | R28, R29, R30 |
| 6 | 604 | RESCAV80P320X160X70-8 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | 300 | RESCAV80P320X160X70-8 | RN7, RN8, RN9, RN10 |
Graphics gremlin design files
The KiCad project lives in the Vakon84/graphics-gremlin repository on GitHub; these links point at the commit this page was built from.
- Layoutisavideo.kicad_pcb
Graphics gremlin: common questions
What microcontroller does the Graphics gremlin use?
The Graphics gremlin is built around the ICE40HX4K-TQ144, from the FPGA family.
How big is the Graphics gremlin PCB?
The Graphics gremlin measures 106.4 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Graphics gremlin?
94 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Graphics gremlin design files?
From the Vakon84/graphics-gremlin repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Graphics gremlin design in my own project?
The repository has no license, so all rights stay with Vakon84. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Graphics gremlin without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765