2 open source boards using the ADA4891-3
Real designs built with the ADA4891-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Graphics gremlin
schlae
106.4 × 95 mm94 parts2LCC-BY-SA-4.0578FPGA
Graphics gremlin
Vakon84
106.4 × 95 mm94 parts2LNo license0
The ADA4891-3 in open source designs
The gallery holds 2 open source boards using the ADA4891-3 from 2 GitHub repositories; a typical one measures about 106.4 × 95 mm and carries around 94 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Graphics gremlin by schlae.
Parts used alongside the ADA4891-3
Microcontrollers on boards using the ADA4891-3
What boards using the ADA4891-3 are built for
ADA4891-3: common questions
Where can I find a ADA4891-3 reference design?
Each of the 2 boards on this page is a real design using the ADA4891-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADA4891-3?
The 74ALVC164245, 74HCT125, AP2114HA-1.2, AP2114HA-3.3 and APX803S00-29SA-7 appear in the most repositories here.
Which microcontrollers do boards using the ADA4891-3 use?
Most are built on FPGA (2).
How big is a typical board using the ADA4891-3?
The median is 106.4 × 95 mm, and 100% are two-layer designs.
What is the most popular open source board using the ADA4891-3?
By GitHub stars, Graphics gremlin by schlae, with 578 stars.
Can I simulate one of these boards using the ADA4891-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.