23 open source boards using the ICE40HX4K-TQ144
Real designs built with the ICE40HX4K-TQ144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Graphics gremlin
schlae
106.4 × 95 mm94 parts2LCC-BY-SA-4.0578FPGA
Minifp
eigenco
104.1 × 71.1 mm52 parts2LNo license136STM32
Project
portlandhodl
284.7 × 94.2 mm139 parts2LApache-2.096FPGA
Azukar-FPGA
maxisimonazzi
100 × 75 mm140 parts2LCERN-OHL-P-2.086FPGA
GammaSpectrometer
RobertGawron
100 × 100 mm291 parts4LMIT16STM32
Hx4k pmod
rschlaikjer
100 × 55 mm97 parts2LMIT11RP2040/RP2350
Opentrig
Dawson-HEP
162.2 × 100 mm408 parts4LEPL-2.06FPGA
Eth4k hardware
theta-machines
98 × 58 mm132 parts4LCERN-OHL-W-2.04FPGA
Fidget
transistorfet
110 × 100 mm98 parts4LGPL-3.04FPGA
Ice40-breakout
null-a
56 × 71.8 mm55 parts2LNo license4FPGA
Xc17 prom prog
msinger
123 × 95 mm281 parts2LCC-BY-SA-4.03FPGA
Iceduino
RubenVoell
80 × 100 mm241 parts4LCERN-OHL-1.23FPGA
AmigaPCI-LBC040
AmigaPCI
159.5 × 96.5 mm124 parts6LNo license3FPGA
M1s fpga playground
tomek-szczesny
90 × 65 mm183 parts4LGPL-3.02FPGA
Lx32
looprotate
80 × 60 mm49 parts4LNo license1FPGA
Dancing dots
softminus
375.4 × 188.5 mm1349 parts2LNo license0FPGA
Mainboard
jerry-kerenzikov
82 × 400 mm176 parts4LCERN-OHL-S-2.00FPGA
Graphics gremlin
Vakon84
106.4 × 95 mm94 parts2LNo license0FPGA
Lx32
potatocpu
80 × 60 mm49 parts4LNo license0STM32
Nyan keys
portlandhodl
284.7 × 94.2 mm138 parts2LApache-2.096FPGA
Ferk-Cart iCE40 Devboard
nelgau
59.2 × 49.2 mm120 parts4LNo license1FPGA
Vanilla ice40
pbozeman
100 × 62 mm100 parts4LMIT5FPGA
Fpga gpu
nojan1
99.3 × 76 mm67 parts2LNo license0
How designs wire the ICE40HX4K-TQ144
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the ICE40HX4K-TQ144 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCIO_3 pins have a decoupling capacitor on 20 of 22 designs, most often 100 nF (then 10 µF).
- The VCCIO_0 pins have a decoupling capacitor on 20 of 22 designs, most often 100 nF (then 10 µF).
- The VCC pins have a decoupling capacitor on 19 of 22 designs, most often 100 nF (then 1 µF).
- The VCCIO_2 pins have a decoupling capacitor on 16 of 22 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 5, 13, 14, 59, 69, 86, 103, 132, 140 | Connected to: GND 100% | — |
| VCCIO_3pin 6, 30 | Connected to: 3.3V 91% |
|
| VCCpin 27, 40, 92, 111 | Connected to: 1.2V 91% |
|
| NCpin 35, 36, 50, 51, 58, 77, 133 | Connected to: Not connected 100% | — |
| VCCIO_2pin 46, 57 | Connected to: 3.3V 91% |
|
| GNDPLL0pin 53 | Connected to: GND 55% · a signal 36% |
|
| VCCPLL0pin 54 | Connected to: Signal 50% · 1.2V 45% |
|
| CDONEpin 65 | Connected to: A connector 27% · not connected 18% |
|
| CRESETpin 66 | Connected to: A connector 32% |
|
| IOB_107_SCKpin 70 | Connected to: A connector 50% |
|
| IOB_108_SSpin 71 | Connected to: A connector 45% |
|
| VCC_SPIpin 72 | Connected to: 3.3V 91% |
|
| IOR_117pin 81 | Connected to: A connector 36% |
|
| IOR_118pin 82 | Connected to: A connector 27% · not connected 23% |
|
| IOR_119pin 83 | Connected to: A connector 27% · not connected 23% |
|
| IOR_120pin 84 | Connected to: A connector 32% · not connected 18% |
|
| VCCIO_1pin 89, 100 | Connected to: 3.3V 91% |
|
| VPP_2V5pin 108 | Connected to: 3.3V 50% · a signal 50% |
|
| VPP_FASTpin 109 | Connected to: Not connected 86% | — |
| IOT_173pin 116 | Connected to: A connector 27% · not connected 18% |
|
| VCCIO_0pin 123, 131 | Connected to: 3.3V 91% |
|
| VCCPLL1pin 126 | Connected to: Signal 50% · 1.2V 45% |
|
| GNDPLL1pin 127 | Connected to: GND 55% · a signal 36% |
|
| IOT_198_GBIN0pin 129 | Connected to: Signal 77% · not connected 23% |
|
99 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Graphics gremlin by schlae, Minifp by eigenco, Nyan keys by portlandhodl and Azukar-FPGA by maxisimonazzi.
The ICE40HX4K-TQ144 in open source designs
The gallery holds 23 open source boards using the ICE40HX4K-TQ144 from 22 GitHub repositories; a typical one measures about 100 × 94.2 mm and carries around 124 components.
52% use four copper layers or more, and 57% carry an open source license.
The most starred is Graphics gremlin by schlae.
Parts used alongside the ICE40HX4K-TQ144
Microcontrollers on boards using the ICE40HX4K-TQ144
What boards using the ICE40HX4K-TQ144 are built for
ICE40HX4K-TQ144: common questions
Where can I find a ICE40HX4K-TQ144 reference design?
Each of the 23 boards on this page is a real design using the ICE40HX4K-TQ144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICE40HX4K-TQ144 VCCIO_3 pin?
The VCCIO_3 pins have a decoupling capacitor on 20 of 22 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the ICE40HX4K-TQ144.
What decoupling capacitors do designs use on the ICE40HX4K-TQ144 VCCIO_0 pin?
The VCCIO_0 pins have a decoupling capacitor on 20 of 22 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the ICE40HX4K-TQ144.
What decoupling capacitors do designs use on the ICE40HX4K-TQ144 VCC pin?
The VCC pins have a decoupling capacitor on 19 of 22 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 22 open source designs using the ICE40HX4K-TQ144.
What parts are used alongside the ICE40HX4K-TQ144?
The FT2232HL, AP2112K-1.2, AP2112K-3.3, IS61C5128AL-10KLI and W25X40CLSN appear in the most repositories here.
Which microcontrollers do boards using the ICE40HX4K-TQ144 use?
Most are built on FPGA (19), STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the ICE40HX4K-TQ144?
The median is 100 × 94.2 mm, and 48% are two-layer designs.
What is the most popular open source board using the ICE40HX4K-TQ144?
By GitHub stars, Graphics gremlin by schlae, with 578 stars.
Can I simulate one of these boards using the ICE40HX4K-TQ144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.