2 open source boards using the APX803S00-29SA-7

Real designs built with the APX803S00-29SA-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The APX803S00-29SA-7 in open source designs

The gallery holds 2 open source boards using the APX803S00-29SA-7 from 2 GitHub repositories; a typical one measures about 106.4 × 95 mm and carries around 94 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Graphics gremlin by schlae.

Microcontrollers on boards using the APX803S00-29SA-7

What boards using the APX803S00-29SA-7 are built for

APX803S00-29SA-7: common questions

Where can I find a APX803S00-29SA-7 reference design?

Each of the 2 boards on this page is a real design using the APX803S00-29SA-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the APX803S00-29SA-7?

The 74ALVC164245, 74HCT125, ADA4891-3, AP2114HA-1.2 and AP2114HA-3.3 appear in the most repositories here.

Which microcontrollers do boards using the APX803S00-29SA-7 use?

Most are built on FPGA (2).

How big is a typical board using the APX803S00-29SA-7?

The median is 106.4 × 95 mm, and 100% are two-layer designs.

What is the most popular open source board using the APX803S00-29SA-7?

By GitHub stars, Graphics gremlin by schlae, with 578 stars.

Can I simulate one of these boards using the APX803S00-29SA-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part