24 open source boards using the 74HCT125
Real designs built with the 74HCT125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956FPGA
Graphics gremlin
schlae
106.4 × 95 mm94 parts2LCC-BY-SA-4.0578STM32
PER|FORMER eurorack sequencer
westlicht
171.5 × 106.7 mm304 parts2LCC-BY-NC-4.0110Flock
skiselev
99.1 × 49.9 mm25 parts2LNo license19Flock v2
skiselev
101.6 × 53.3 mm31 parts2LCERN-OHL-S-2.01874HCT6526 Board 3
dmolinagarcia
100 × 100 mm89 parts4LNo license14Raspberry Pi
Battmanpi
andrewerrington
65 × 56 mm76 parts2LGPL-3.06AVR/Arduino
AZTEC Motherboard
awarsewa
168 × 150 mm307 parts2LGPL-3.03RP2040/RP2350
Dino z80
rh1tech
99.5 × 80 mm258 parts4LGPL-3.03- schematic only · 30 partsRP2040/RP2350
PerryFi2
SanPollo
30 partsNo license3 AutoPLC
dezamora98
208.9 × 119.9 mm358 parts2LNo license2Controller mcu bu an 64
Mo-MoS
99 × 99 mm116 parts4LNo license1AVR/Arduino
Peripheral board
Lintaroh
165 × 135 mm145 parts2LMIT0FPGA
Graphics gremlin
Vakon84
106.4 × 95 mm94 parts2LNo license0ESP32
Open lasertag
G5K-org
54 × 46 mm65 parts4LNo license0ESP32
Dodeca blink
barafael
86.6 × 96.9 mm20 parts2LNo license0Neopixelcontroller
chickadee-tech
83 × 42 mm14 parts2LNo license0ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956MUTIF-1613 CPU Board
ja1umi
155 × 114 mm58 parts2LMIT3Lcd display
kwiecinski
99.5 × 99.5 mm71 parts2LMIT2Controller mcu bu an 64 BIG
Mo-MoS
144 × 78 mm116 parts4LNo license174HCT6526 Board 0
dmolinagarcia
100 × 100 mm73 parts4LNo license14GPRModule
crempp
100 × 80 mm51 parts2LNo license4Analog mux
Mo-MoS
60 × 60 mm11 parts2LNo license1
How designs wire the 74HCT125
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the 74HCT125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 16 of 19 designs, most often 100 nF (then 1 µF).
- The 1OE pin is tied to GND on 13 of 19 designs (a signal on 6).
- The 2OE pin is tied to GND on 12 of 19 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OEpin 1 | Connected to: GND 68% · a signal 32% | — |
| 2OEpin 4 | Connected to: GND 63% · a signal 32% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: 5V 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ButtonsLEDs by shanteacontrols, Graphics gremlin by schlae, PER|FORMER eurorack sequencer by westlicht and Flock by skiselev.
The 74HCT125 in open source designs
The gallery holds 24 open source boards using the 74HCT125 from 20 GitHub repositories; a typical one measures about 100 × 95 mm and carries around 79 components.
74% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is OpenDeck r3.1.2 by shanteacontrols.
Parts used alongside the 74HCT125
Microcontrollers on boards using the 74HCT125
What boards using the 74HCT125 are built for
74HCT125: common questions
Where can I find a 74HCT125 reference design?
Each of the 24 boards on this page is a real design using the 74HCT125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT125 VCC pin?
The VCC pin has a decoupling capacitor on 16 of 19 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 19 open source designs using the 74HCT125.
How is the 74HCT125 1OE pin connected?
The 1OE pin is tied to GND on 13 of 19 designs (a signal on 6). Counted from the KiCad layouts of 19 open source designs using the 74HCT125.
How is the 74HCT125 2OE pin connected?
The 2OE pin is tied to GND on 12 of 19 designs (a signal on 6). Counted from the KiCad layouts of 19 open source designs using the 74HCT125.
What parts are used alongside the 74HCT125?
The 74HC165, 74HC138, 74HC595, 37C65 and 4051 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT125 use?
Most are built on RP2040/RP2350 (3), AVR/Arduino (2), ESP32 (2) and FPGA (2).
How big is a typical board using the 74HCT125?
The median is 100 × 95 mm, and 74% are two-layer designs.
What is the most popular open source board using the 74HCT125?
By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the 74HCT125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.