5 open source boards using the 74ALVC164245
Real designs built with the 74ALVC164245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Graphics gremlin
schlae
106.4 × 95 mm94 parts2LCC-BY-SA-4.0578- schematic only · 34 parts
Tiny486
Ilikemining1
34 partsNo license7 FPGA
Graphics gremlin
Vakon84
106.4 × 95 mm94 parts2LNo license0AVR/Arduino
Coolgirl nes multicart
viuhimciuc
100 × 59 mm61 parts2LNo license0PikaPC Host
techav-homebrew
101.6 × 101.6 mm122 parts4LNo license3
The 74ALVC164245 in open source designs
The gallery holds 5 open source boards using the 74ALVC164245 from 5 GitHub repositories; a typical one measures about 104 × 95 mm and carries around 94 components.
75% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Graphics gremlin by schlae.
Parts used alongside the 74ALVC164245
Microcontrollers on boards using the 74ALVC164245
What boards using the 74ALVC164245 are built for
74ALVC164245: common questions
Where can I find a 74ALVC164245 reference design?
Each of the 5 boards on this page is a real design using the 74ALVC164245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74ALVC164245?
The 74HCT125, ADA4891-3, AP2114HA-1.2, AP2114HA-3.3 and APX803S00-29SA-7 appear in the most repositories here.
Which microcontrollers do boards using the 74ALVC164245 use?
Most are built on FPGA (2) and AVR/Arduino (1).
How big is a typical board using the 74ALVC164245?
The median is 104 × 95 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74ALVC164245?
By GitHub stars, Graphics gremlin by schlae, with 578 stars.
Can I simulate one of these boards using the 74ALVC164245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.