15 open source boards using the NCP1117-3.3_TO252

Real designs built with the NCP1117-3.3_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the NCP1117-3.3_TO252

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NCP1117-3.3_TO252 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 8 of 14 designs, most often 10 µF (then 1 µF).
GNDpin 1Connected to: GND 79% · a signal 21%
VOpin 2Connected to: 3.3V 86%
VIpin 3Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 57% · 10 µF (7), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp32 by sourabhmisal, ESP32indEVB by gmarocco, Graduation Project by hamzaaldabe and 2. IndicationBoard by SshgurkiratSingh.

The NCP1117-3.3_TO252 in open source designs

The gallery holds 15 open source boards using the NCP1117-3.3_TO252 from 15 GitHub repositories; a typical one measures about 93.6 × 64.5 mm and carries around 46 components.

57% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is Esp32 by sourabhmisal.

Microcontrollers on boards using the NCP1117-3.3_TO252

NCP1117-3.3_TO252: common questions

Where can I find a NCP1117-3.3_TO252 reference design?

Each of the 15 boards on this page is a real design using the NCP1117-3.3_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the NCP1117-3.3_TO252 VI pin?

The VI pin has a decoupling capacitor on 8 of 14 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the NCP1117-3.3_TO252.

What parts are used alongside the NCP1117-3.3_TO252?

The ESP32-WROOM-32, CP2102N-A01-GQFN28, RP2040, NCP1117-5.0_TO252 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the NCP1117-3.3_TO252 use?

Most are built on ESP32 (9), RP2040/RP2350 (3), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the NCP1117-3.3_TO252?

The median is 93.6 × 64.5 mm, and 57% are two-layer designs.

What is the most popular open source board using the NCP1117-3.3_TO252?

By GitHub stars, Esp32 by sourabhmisal, with 12 stars.

Can I simulate one of these boards using the NCP1117-3.3_TO252 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part