ESP32CAM Shield
vonmartins·ESP32CAM_Shield·Hardware/Kicad/ESP32CAM Shield.kicad_pcb
About the ESP32CAM Shield
ESP32CAM Shield is an open source PCB design by vonmartins, published on GitHub. It is a 4-layer board measuring 29 × 45 mm, with 45 components from 33 distinct parts.
Other key parts include the MCP73831-2-OT, AP2112K-3.3, ADS1115IDGS, DW01A and CP2102N-AXX-XQFN20. By type, the board carries 18 resistors, 10 capacitors, 6 ICs, 4 connectors, 2 transistors and 2 switches.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Shield for ESP32-CAM: Li-ion Battery, Battery charger, Microphone and USB

Main components on the ESP32CAM Shield
ESP32CAM Shield bill of materials (BOM)
45 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | DW01A | SOT-23-6 | U4 |
| 1 | CP2102N-AXX-XQFN20 CP2102N-Axx-xQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | FS8205A | SOT-23-6 | Q2 |
| 2 | CONN_01X08_SOCKET Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | C265016 JST-PH | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_Amphenol_12401610E4-2A | J4 |
| 1 | SPH0645LM4H | Knowles_SPH0645LM4H-6_3.5x2.65mm | MK1 |
| 2 | C431541 SW_SPDT | SW_SPDT_PCM12 | SW1, SW2 |
| 1 | C8598 D_Schottky_Small | D_SOD-123 | D1 |
| 1 | LED | LED_0805_2012Metric | D2 |
| 5 | 100N 100n | C_0402_1005Metric | C1, C3, C7, C8, C10 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 1 | 1u | C_0402_1005Metric | C4 |
| 1 | 10U 10u | C_0402_1005Metric | C5 |
| 1 | 220P 200p | C_0402_1005Metric | C6 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7U 4.7u | C_0402_1005Metric | C9 |
| 1 | 10K 10k | R_0603_1608Metric | R1 |
| 1 | 2k | R_0402_1005Metric | R2 |
| 1 | 470 | R_0603_1608Metric | R3 |
| 1 | 100K 100k | R_0402_1005Metric | R4 |
| 2 | 100K 100k | R_0603_1608Metric | R5, R6 |
| 1 | 100 | R_0603_1608Metric | R7 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R8, R9 |
| 3 | 51 | R_0402_1005Metric | R10, R11, R13 |
| 2 | 1k | R_0402_1005Metric | R12, R16 |
| 1 | 22K 22k | R_0402_1005Metric | R14 |
| 1 | 47K 47k | R_0402_1005Metric | R15 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R17, R18 |
ESP32CAM Shield design files
The KiCad project lives in the vonmartins/ESP32CAM_Shield repository on GitHub; these links point at the commit this page was built from.
ESP32CAM Shield: common questions
How big is the ESP32CAM Shield?
The ESP32CAM Shield measures 29 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32CAM Shield?
45 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32CAM Shield design files?
From the vonmartins/ESP32CAM_Shield repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32CAM Shield design in my own project?
The repository has no license, so all rights stay with vonmartins. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k