IR array sensor

Vulcan758·My-PCB-Designs-·IR_array_sensor/IR_array_sensor.kicad_pcb

IR array sensor PCB layout, top view — open source AVR/Arduino board by Vulcan758

About the IR array sensor PCB

IR array sensor is an open source AVR/Arduino PCB design by Vulcan758, published on GitHub. It is a 2-layer board measuring 131.5 × 133.3 mm, with 57 components from 16 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the QRE1113, AMS1117-5.0 and L298N. By type, the board carries 19 resistors, 18 diodes, 9 ICs, 4 capacitors, 3 modules and 2 connectors.

It belongs with the sensors designs in this gallery.

From the project

all the designs I have so far

Main components on the IR array sensor

IR array sensor bill of materials (BOM)

57 components, 16 distinct parts.

QtyPartRefs
7
QRE1113
U1, U2, U3, U4, U5, U6, U7
1
AMS1117-5.0
U8
1
L298N
U10
1
Arduino_Nano_v3.x
A1
2
Motor_DC
M1, M2
1
Bluetooth module
J2
1
Input Power
J3
2
SW_Push
SW1, SW2
7
LED
D1, D2, D3, D4, D5, D6, D7
8
1N4007
D8, D11, D12, D13, D14, D16, D17, D18
3
LED
D9, D10, D15
1
22u
C1
1
22u
C2
2
100n
C3, C4
16
R
R1, R2, R3, R4, R5, R6, R7, R8 +8
3
1k
R15, R16, R17

IR array sensor design files

The KiCad project lives in the Vulcan758/My-PCB-Designs- repository on GitHub; these links point at the commit this page was built from.

IR array sensor: common questions

What microcontroller does the IR array sensor use?

The IR array sensor is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the IR array sensor PCB?

The IR array sensor measures 131.5 × 133.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IR array sensor?

57 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the IR array sensor design files?

From the Vulcan758/My-PCB-Designs- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IR array sensor design in my own project?

The repository has no license, so all rights stay with Vulcan758. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IR array sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in My-PCB-Designs-

Similar boards