Saucey - Copy
Vulcan758·My-PCB-Designs-·saucey/v2/saucey - Copy.kicad_pcb
About the Saucey - Copy PCB
Saucey - Copy is an open source ESP32 PCB design by Vulcan758, published on GitHub. It is a 2-layer board measuring 80.5 × 40.8 mm, with 52 components from 23 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, CP2102N-A02-GQFN28 and MPU-6050. By type, the board carries 15 resistors, 13 capacitors, 6 transistors, 6 diodes, 4 ICs and 4 modules.
It belongs with the robotics & motion designs in this gallery.
From the project
all the designs I have so far
Main components on the Saucey - Copy
Saucey - Copy bill of materials (BOM)
52 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-A02-GQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 3 | Motor_DC | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | M2, M3, M4 |
| 1 | Motor JST | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | M5 |
| 2 | S8050 | TO-92_Inline | Q1, Q2 |
| 4 | SI2306 | SOT-23 | Q4, Q5, Q6, Q7 |
| 1 | Conn_01x02_Socket | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D6 |
| 4 | 1N4148W | D_SOD-123 | D2, D3, D4, D5 |
| 2 | 10u | C_0603_1608Metric | C1, C7 |
| 3 | 0.1u | C_0603_1608Metric | C2, C8, C9 |
| 2 | 22u | C_1210_3225Metric | C3, C4 |
| 5 | 1u | C_0402_1005Metric | C5, C11, C12, C13, C14 |
| 1 | 1uf | C_0402_1005Metric | C6 |
| 2 | 2.2k | R_0805_2012Metric | R1, R8 |
| 10 | 10k | R_0805_2012Metric | R2, R6, R7, R9, R10, R11, R12, R13 +2 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22k | R_1210_3225Metric | R3 |
| 1 | 48k | R_1206_3216Metric | R4 |
| 1 | 1k | R_1206_3216Metric | R5 |
Saucey - Copy design files
The KiCad project lives in the Vulcan758/My-PCB-Designs- repository on GitHub; these links point at the commit this page was built from.
Saucey - Copy: common questions
What microcontroller does the Saucey - Copy use?
The Saucey - Copy is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Saucey - Copy PCB?
The Saucey - Copy measures 80.5 × 40.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Saucey - Copy?
52 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Saucey - Copy design files?
From the Vulcan758/My-PCB-Designs- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Saucey - Copy design in my own project?
The repository has no license, so all rights stay with Vulcan758. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Saucey - Copy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in My-PCB-Designs-
AVR/Arduino
IR array sensor
Vulcan758
131.5 × 133.3 mm57 parts2LNo license0AVR/Arduino
IR array sensor - Copy
Vulcan758
113.5 × 138 mm57 parts2LNo license0ESP32
Saucey
Vulcan758
74.5 × 41.3 mm48 parts2LNo license0ESP32
Esp gari - Copy
Vulcan758
50.5 × 68.3 mm38 parts4LNo license0ESP32
Esp gari
Vulcan758
50.5 × 63.9 mm38 parts4LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k