IR array sensor - Copy

Vulcan758·My-PCB-Designs-·IR_array_sensor/LFR with L298 IC v1/IR_array_sensor - Copy.kicad_pcb

IR array sensor - Copy PCB layout, top view — open source AVR/Arduino board by Vulcan758

About the IR array sensor - Copy PCB

IR array sensor - Copy is an open source AVR/Arduino PCB design by Vulcan758, published on GitHub. It is a 2-layer board measuring 113.5 × 138 mm, with 57 components from 16 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the QRE1113, AMS1117-5.0 and L298N. By type, the board carries 19 resistors, 18 diodes, 9 ICs, 4 capacitors, 3 modules and 2 connectors.

It belongs with the sensors designs in this gallery.

From the project

all the designs I have so far

Main components on the IR array sensor - Copy

IR array sensor - Copy bill of materials (BOM)

57 components, 16 distinct parts.

QtyPartRefs
7
QRE1113
U1, U2, U3, U4, U5, U6, U7
1
AMS1117-5.0
U8
1
L298N
U10
1
Arduino_Nano_v3.x
A1
2
Motor_DC
M1, M2
1
Bluetooth module
J2
1
Input Power
J3
2
SW_Push
SW1, SW2
7
LED
D1, D2, D3, D4, D5, D6, D7
8
1N4007
D8, D11, D12, D13, D14, D16, D17, D18
3
LED
D9, D10, D15
1
22u
C1
1
22u
C2
2
100n
C3, C4
16
R
R1, R2, R3, R4, R5, R6, R7, R8 +8
3
1k
R15, R16, R17

IR array sensor - Copy design files

The KiCad project lives in the Vulcan758/My-PCB-Designs- repository on GitHub; these links point at the commit this page was built from.

IR array sensor - Copy: common questions

What microcontroller does the IR array sensor - Copy use?

The IR array sensor - Copy is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the IR array sensor - Copy PCB?

The IR array sensor - Copy measures 113.5 × 138 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IR array sensor - Copy?

57 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the IR array sensor - Copy design files?

From the Vulcan758/My-PCB-Designs- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IR array sensor - Copy design in my own project?

The repository has no license, so all rights stay with Vulcan758. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IR array sensor - Copy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in My-PCB-Designs-

Similar boards