Saucey
Vulcan758·My-PCB-Designs-·saucey/saucey.kicad_pcb
About the Saucey PCB
Saucey is an open source ESP32 PCB design by Vulcan758, published on GitHub. It is a 2-layer board measuring 74.5 × 41.3 mm, with 48 components from 19 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and MPU-6050. By type, the board carries 13 capacitors, 12 resistors, 7 diodes, 5 transistors, 4 modules and 3 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
all the designs I have so far
Main components on the Saucey
Saucey bill of materials (BOM)
48 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 4 | Motor_DC | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | M1, M2, M3, M4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 4 | SI2306 | SOT-23 | Q3, Q4, Q5, Q6 |
| 1 | Conn_01x02_Socket | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 5 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7 |
| 2 | 10u | C_0603_1608Metric | C1, C6 |
| 4 | 0.1u | C_0603_1608Metric | C2, C7, C8, C9 |
| 2 | 22u | C_1210_3225Metric | C3, C4 |
| 5 | 1u | C_0402_1005Metric | C5, C10, C11, C12, C13 |
| 2 | 2.2k | R_0805_2012Metric | R1, R8 |
| 7 | 10k | R_0805_2012Metric | R2, R7, R10, R11, R12, R13, R14 |
| 1 | 100k | R_0603_1608Metric | R3 |
| 2 | 5.7k | R_0603_1608Metric | R4, R5 |
Saucey design files
The KiCad project lives in the Vulcan758/My-PCB-Designs- repository on GitHub; these links point at the commit this page was built from.
- Layoutsaucey/saucey.kicad_pcb
- Schematicsaucey/saucey.kicad_sch
Saucey: common questions
What microcontroller does the Saucey use?
The Saucey is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Saucey PCB?
The Saucey measures 74.5 × 41.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Saucey?
48 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Saucey design files?
From the Vulcan758/My-PCB-Designs- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Saucey design in my own project?
The repository has no license, so all rights stay with Vulcan758. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Saucey without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in My-PCB-Designs-
AVR/Arduino
IR array sensor
Vulcan758
131.5 × 133.3 mm57 parts2LNo license0AVR/Arduino
IR array sensor - Copy
Vulcan758
113.5 × 138 mm57 parts2LNo license0ESP32
Saucey - Copy
Vulcan758
80.5 × 40.8 mm52 parts2LNo license0ESP32
Esp gari - Copy
Vulcan758
50.5 × 68.3 mm38 parts4LNo license0ESP32
Esp gari
Vulcan758
50.5 × 63.9 mm38 parts4LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k