Soilsense-50x70

wasylews·soilsense·design/soilsense/soilsense-50x70.kicad_pcb

Soilsense-50x70 PCB layout, top view — open source ESP8266 board by wasylews

About the Soilsense-50x70 PCB

Soilsense-50x70 is an open source ESP8266 PCB design by wasylews, published on GitHub. It is a 10-layer board measuring 70 × 50 mm, with 25 components from 14 distinct parts.

Its main chip is the ESP-01, from the ESP8266 family. Other key parts include the CapSoilSensor_v1.2, ADS1115IDGS, MCP1700x-330xxTO and GXHT30. By type, the board carries 11 resistors, 6 capacitors, 5 ICs, 2 transistors and 1 diode.

It belongs with the iot & wireless, sensors and power & battery designs in this gallery.

From the project

A low-power soil moisture and climate sensor on an ESP-01, powered by a single 18650 cell for an estimated six months. Custom PCB and a 3D-printed enclosure.

A low-power soil moisture and climate sensor for your garden. It samples capacitive soil moisture, temperature, and humidity, then reports them to Home Assistant. The whole device runs on an ESP-01 and is powered by a single 18650 cell, good for roughly six months per charge. It lives in a 3D-printed enclosure you can print at home.

- Battery-operated ESP-01 that deep-sleeps between readings to stretch battery life - Single 18650 cell, estimated six months per charge - Capacitive soil moisture probe sampled through an ADS1115 ADC - GXHT30 digital temperature and humidity sensor - Publishes…

Soilsense-50x70, from the project README
From the project README

Main components on the Soilsense-50x70

CapSoilSensor_v1.2ADS1115IDGSMCP1700x-330xxTOGXHT30ESP-01

Soilsense-50x70 bill of materials (BOM)

25 components, 14 distinct parts.

QtyPartRefs
1
CapSoilSensor_v1.2
U2
1
ADS1115IDGS
U3
1
MCP1700x-330xxTO
U4
1
GXHT30
U5
1
ESP-01
U6
2
AO3407
Q1, Q2
1
1N5819
D1
4
100nF
C1, C4, C5, C6
2
10uF
C2, C3
5
100K
R1, R4, R5, R8, R9
1
100
R2
1
220K
R3
2
10K
R6, R7
2
4.7K
R10, R11

Soilsense-50x70 design files

The KiCad project lives in the wasylews/soilsense repository on GitHub; these links point at the commit this page was built from.

Soilsense-50x70: common questions

What microcontroller does the Soilsense-50x70 use?

The Soilsense-50x70 is built around the ESP-01, from the ESP8266 family.

How big is the Soilsense-50x70 PCB?

The Soilsense-50x70 measures 70 × 50 mm, has 10 copper layers and is 1.6 mm thick.

How many components are on the Soilsense-50x70?

25 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Soilsense-50x70 design files?

From the wasylews/soilsense repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Soilsense-50x70 design in my own project?

The repository has no license, so all rights stay with wasylews. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Soilsense-50x70 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in soilsense

Similar boards