Soilsense esp right
wasylews·soilsense·design/soilsense/soilsense_esp_right.kicad_pcb
About the Soilsense esp right PCB
Soilsense esp right is an open source ESP8266 PCB design by wasylews, published on GitHub. It is a 10-layer board measuring 70 × 30 mm, with 26 components from 16 distinct parts.
Its main chip is the ESP-01, from the ESP8266 family. Other key parts include the TP4056, CapSoilSensor_v1.2, ADS1115IDGS, MCP1700x-330xxTO and GXHT30. By type, the board carries 11 resistors, 6 ICs, 6 capacitors, 2 transistors and 1 diode.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
A low-power soil moisture and climate sensor on an ESP-01, powered by a single 18650 cell for an estimated six months. Custom PCB and a 3D-printed enclosure.
A low-power soil moisture and climate sensor for your garden. It samples capacitive soil moisture, temperature, and humidity, then reports them to Home Assistant. The whole device runs on an ESP-01 and is powered by a single 18650 cell, good for roughly six months per charge. It lives in a 3D-printed enclosure you can print at home.
- Battery-operated ESP-01 that deep-sleeps between readings to stretch battery life - Single 18650 cell, estimated six months per charge - Capacitive soil moisture probe sampled through an ADS1115 ADC - GXHT30 digital temperature and humidity sensor - Publishes…

Main components on the Soilsense esp right
Soilsense esp right bill of materials (BOM)
26 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | TP4056 | U1 |
| 1 | CapSoilSensor_v1.2 | PinHeader_1x03_P2.54mm_Vertical | U2 |
| 1 | ADS1115IDGS | PinHeader_1x10_P2.54mm_Vertical | U3 |
| 1 | MCP1700x-330xxTO | TO-92 | U4 |
| 1 | GXHT30 | PinHeader_1x06_P2.54mm_Vertical | U5 |
| 1 | ESP-01 | ESP-01 | U6 |
| 2 | AO3407 | PinHeader_1x03_P2.54mm_Vertical | Q1, Q2 |
| 1 | 1N5819 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 4 | 100nF | C_Radial_D4.0mm_H5.0mm_P1.50mm | C1, C4, C5, C6 |
| 2 | 10uF | CP_Radial_D8.0mm_P5.00mm | C2, C3 |
| 5 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5, R8, R9 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 2 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
Soilsense esp right design files
The KiCad project lives in the wasylews/soilsense repository on GitHub; these links point at the commit this page was built from.
Soilsense esp right: common questions
What microcontroller does the Soilsense esp right use?
The Soilsense esp right is built around the ESP-01, from the ESP8266 family.
How big is the Soilsense esp right PCB?
The Soilsense esp right measures 70 × 30 mm, has 10 copper layers and is 1.6 mm thick.
How many components are on the Soilsense esp right?
26 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soilsense esp right design files?
From the wasylews/soilsense repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Soilsense esp right design in my own project?
The repository has no license, so all rights stay with wasylews. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Soilsense esp right without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in soilsense
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398